Attaches zippers and pipings easily. Its position can be adjusted exactly on the edge of zipper/piping, avoiding the non-flat parts of zipper/piping, and presses the fabric with just right pressure.
1. Screw on the presser foot and select a straight stitch (left).
2. Position the presser foot over the long feed dogs on either left or right.
3. Loosen the clamp screw at the back of the presser foot and slide the presser foot so that the needle fits on the opening on the presser foot.
4. Check the needle does not hit the presser foot, and then tighten the clamp screw with a screwdriver.
5. Sew.

Compatible with the following Brother home sewing machines

• Innov-is 4000D / 4000, 2500D, 1500D / 1500, QC-1000
• Innov-is 1000 / 1200
• Innov-is 200 / 400 / 600
• Innov-is NX-250 / 450 / 650
• Innov-is 500D / 500
• CS-80 / 8060 / 8080 / 8120 / 8130 /8150
• SE-270D, HE-120
• NX-200 / 400 / 600 series
• BC-2100 / 2300 / 2500 series
• CS-100 / 4000 / 6000 series
• ES2000 / 2200 / 2400 series
• PS-2250 / 2360 / 2470
• PS-3100 / 3700
• PS-53 / 55 / 57
• Star 230E / 240E
• BM-2600 / 2700 / 3500 / 3600 series
• XL-2100 / 2200 / 2600 / 3500 / 3600 series
• XL3800
• XR-65T
• XL-6040 / 6050 / 6060 series
• XL-6452 / 6562
• XR-46C / 52C
• XL-5000 series
• PS-12-40
• PX-100 / 200 / 300 series
• XL-3000 / 4000 series
• XR-31-40
• ULT series
• Super Galaxie 3000 Series
• PC-6500 / 8200 / 8500 series
• Super Ace + e
• Super Galaxie 2000 series
• PE-300S / 400D
• PC-2800 / 3000 / 6000
• Super Ace I / II / III S.E.
• CS-8072
• PS-2200 / 2300 / 2500
• Star 110 / 120E / 130E / 140E
• PS-1000 / 1250 / 1800 / 1950 / 2000 / 2100
• Star 10 / 15 / 20 / 20E / 30E / 40E
• BS-2400 series
• LS-1520
• LS-1717P / 1717B
• LS-2000 / 2100 / 2200 / 2700 / 2900 series
• VX-1400 / 1500 series