Attaches up to 3/16 inch (5 mm) wide braids, ribbons, tapes, cords, etc.
1. Loosen the screw on the presser foot and insert a braid through the guide before attaching the presser foot on the machine.
2. Slide the plate of the guide back and forth to fit the width of the braid.
3. Tighten the screw and pull the braid behind the presser foot.
4. Attach the presser foot onto the machine.
5. Set the zigzag width slightly wider than the width of the braid.
6. Stitch braid in place.

Compatible with the following Brother home sewing machines

• Innov-is 4000D / 4000, 2500D, 1500D / 1500, QC-1000
• Innov-is 1000 / 1200
• Innov-is 200 / 400 / 600
• Innov-is NX-250 / 450 / 650
• Innov-is 500D / 500
• CS-80 / 8060 / 8080 / 8120 / 8130 /8150
• SE-270D, HE-120
• NX-200 / 400 / 600 series
• BC-2100 / 2300 / 2500 series
• CS-100 / 4000 / 6000 series
• ES2000 / 2200 / 2400 series
• PS-2250 / 2360 / 2470
• PS-3100 / 3700
• PS-53 / 55 / 57
• Star 230E / 240E
• BM-2600 / 2700 / 3500 / 3600 series
• XL-2100 / 2200 / 2600 / 3500 / 3600 series
• XL3800
• XR-65T
• XL-6040 / 6050 / 6060 series
• XL-6452 / 6562
• XR-46C / 52C
• XL-5000 series
• PS-12-40
• PX-100 / 200 / 300 series
• XL-3000 / 4000 series
• XR-31-40
• ULT series
• Super Galaxie 3000 Series
• PC-6500 / 8200 / 8500 series
• Super Ace + e
• Super Galaxie 2000 series
• PE-300S / 400D
• PC-2800 / 3000 / 6000
• Super Ace I / II / III S.E.
• CS-8072
• PS-2200 / 2300 / 2500
• Star 110 / 120E / 130E / 140E
• PS-1000 / 1250 / 1800 / 1950 / 2000 / 2100
• Star 10 / 15 / 20 / 20E / 30E / 40E
• BS-2400 series
• LS-1520
• LS-1717P / 1717B
• LS-2000 / 2100 / 2200 / 2700 / 2900 series
• VX-1400 / 1500 series