Search Spares and Accessories
Brother / Brother Picot Foot 7mm (Cat E)
Brother Picot Foot 7mm (Cat E)
  • Brother Picot Foot 7mm (Cat E) Brother Category E
  • Brother Picot Foot

Brother Picot Foot 7mm (Cat E)

Now £14.99
Save £5.00 Was £19.99
0 reviews
QUANTITY

Product Code : XC1974052/F039N
Product Details

Brother Picot Foot 7mm (Cat E).

 

Handy for use when sewing special fabric edges like frills. For shell effect when hemming in zigzag stitch.


1. Increase upper thread tension.
2. Place the fabric with the wrong side facing up under the presser foot.
3. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches.
4. Raise the needle and the presser foot.
5. Hold the fabric from the back and front and roll it into the curled part of the foot.
6. Position the edge of the fabric behind the needle and lower the presser foot.
7. Slowly sew 2-3 stitches, making sure the fabric is rolling around the curled part of the foot.
8. Continue to sew to the end of the fabric.

 

Compatible with Brother Category E Sewing machines.





Now 14.99

Brother Picot Foot 7mm (Cat E) Brother Category E

Brother Picot Foot 7mm (Cat E).

 

Handy for use when sewing special fabric edges like frills. For shell effect when hemming in zigzag stitch.


1. Increase upper thread tension.
2. Place the fabric with the wrong side facing up under the presser foot.
3. Lower the needle into the fabric approximately 1/8" from the edge and sew 2-3 stitches.
4. Raise the needle and the presser foot.
5. Hold the fabric from the back and front and roll it into the curled part of the foot.
6. Position the edge of the fabric behind the needle and lower the presser foot.
7. Slowly sew 2-3 stitches, making sure the fabric is rolling around the curled part of the foot.
8. Continue to sew to the end of the fabric.

 

Compatible with Brother Category E Sewing machines.

Website Programming, CMS and SEO by Web Alliance Ltd.