Free Postage*
Fast Delivery*
Collect In Store
Unbeatable Prices
Interest Free Finance Available*
Filter By
Clear All
Brand
Price
Suitable for User
Suitable for
Suitable for Material
Features
GUR Rating

Husqvarna Viking Clearance

Items: 152430
Compare Selected Products
Husqvarna Viking Endless Embroidery Hoop II
Husqvarna Viking Endless Embroidery Hoop II
Husqvarna Viking Endless Embroidery Hoop II
Now £97.99
Husqvarna Viking Endless Embroidery Hoop II

Husqvarna Viking Endless Embroidery Hoop II

Husqvarna Viking Endless Embroidery Hoop II Create embroidery borders and edgings in ongoing matched embroidery quickly and easily.  Please..
£97.99
£97.99
Save £31.01 Was £129.00
 
Add Husqvarna Viking Endless Embroidery Hoop II to Shopping Basket Add To Basket
Husqvarna Viking Mega Hoop | 412625502
Husqvarna Viking Mega Hoop | 412625502
Husqvarna Viking Mega Hoop | 412625502
Now £51.99
Husqvarna Viking Mega Hoop | 412625502

Husqvarna Viking Mega Hoop | 412625502

Husqvarna Viking Mega Hoop Embroider beautiful areas up to 360 mm x 150 mm  (14.2" x 6") Please note: This item cannot be cancelled..
£64.99
£51.99
Save £13.00 Was £64.99
 
Add Husqvarna Viking Mega Hoop | 412625502 to Shopping Basket Add To Basket
Husqvarna Viking Circular Attachment
Husqvarna Viking Circular Attachment
Husqvarna Viking Circular Attachment
Now £44.99

This Husqvarna Viking Circular Attachment is the perfect tool when you want to make unique embellishments on your sewing projects, garments and quilts. You can sew simple circles, flowers, or parts of circles to create unique borders or graphic patterns. Combine circles in different sizes and create large patterns. Almost all utility or decorative stitches can be used when stitching with this attachment so you are free to use your favourite. The possibilities available with the Circular Attachment are as unending as the circles it creates!

Included with the Circular attachment:

  • Circular Attachment with Size Guide
  • Pivot Pin
  • Three different templates: one for sewing circles (1), one for a four-petal flower (2) and one for a six-petal flower (3). The numbers on the templates correspond to the diameter of the circle (in cm)
  • CD with User Instructions in 11 languages, a tutorial and ideas on how to combine circles using the templates.  

With this Circular attachment you can sew circles with a diameter ranging from 6 cm up to 26cm. The diameters of the circles are printed in both Inches and Centimetres.

Will Fit Husqvarna Viking Category 7.

Not for use with DESIGNER™ SE series, DESIGNER™ I, II or QUILT DESIGNER™ II

Husqvarna Viking Circular Attachment

Husqvarna Viking Circular Attachment

This Husqvarna Viking Circular Attachment is the perfect tool when you want to make unique embellishments on your sewing projects, garments and quilts..
£44.99
£44.99
Save £15.00 Was £59.99
 
Add Husqvarna Viking Circular Attachment to Shopping Basket Add To Basket
Husqvarna Viking Yarn Embellisment Foot Set (Cat 7)
Husqvarna Viking Yarn Embellisment Foot Set (Cat 7)
Husqvarna Viking Yarn Embellisment Foot Set (Cat 7)
Now £26.24

Husqvarna Viking Yarn Embellisment Foot Set (Cat 7)

 

With the HUSQVARNA VIKING Yarn Embellishment Foot Set, you can easily create decorative yarn embellishment when sewing. The embellishment is created when sewing using the specially designed stitches for this foot together with yarn. The effect of the embellishment can be changed dramatically by using different types of yarn. This presser foot is designed to be used with specially designed stitches. Note: No stitches except for the specially designed stitches can be used.

 

For DESIGNER™ DIAMOND, DESIGNER™ RUBY and SAPPHIRE

Husqvarna Viking Yarn Embellisment Foot Set (Cat 7)

Husqvarna Viking Yarn Embellisment Foot Set (Cat 7)

Husqvarna Viking Yarn Embellisment Foot Set (Cat 7) With the HUSQVARNA VIKING Yarn Embellishment Foot Set, you can easily create decorative yarn..
£34.99
£26.24
Save £35.00 Was £69.99
 
Add Husqvarna Viking Yarn Embellisment Foot Set (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Clear A Presser Feet Kit (Cat 5)
Husqvarna Viking Clear A Presser Feet Kit (Cat 5)
Husqvarna Viking Clear A Presser Feet Kit (Cat 5)
Now £14.62

Husqvarna Viking Clear A Presser Feet Kit (Cat 5)

 

Kit contains: Clear Foot A, Clear A Edge Stitching Foot, Clear Edge/Joining Foot

 

Other information

CLEAR A FOOT

The Clear A Foot is used mainly for straight stitching and zig-zag stitching with a stitch length longer than 1.0. The clear view allows you to see exactly where you are stitching.
1. Snap on the Clear A Foot.
2. Select desired stitch.
3. Sew.

CLEAR A EDGE STITCHING FOOT

The Clear Edge Stitching Foot guides topstitching and edge stitching perfectly. The clear view allows you to see exactly where you are stitching.
1. Snap on the Clear A Edge Stitching Foot.
2. Place project under foot with the flange guide at the edge of the project.
3. Select straight stitch and adjust needle position so the stitching will be sewn at desired distance from edge.
4. For additional parallel rows of topstitching, adjust needle position and sew.

CLEAR EDGE/JOINING FOOT

The Clear Edge/Joining Foot guides topstitching and trims that are sewn to an edge or when two trims are sewn together. The clear view allows you to see exactly where you are stitching.
Joining:
1. Snap on the Clear A Edge/Joining Foot
2. Place edge of fabric against flange/guide.
3. Select the 3-step zig-zag, or bridging stitch,
length 2-3, width 4-7.
4. Sew.
Trims:
1. Snap on the Clear A Edge/Joining Foot
2. Place two pieces of fabric or trim, one on each side of the guide/flange of the foot.
3. Select the 3-step zig-zag, or bridging stitch,
length 2-3, width 4-7.
4. Sew. Keep fabric/trim against the flange/guide to join them.

Husqvarna Viking Clear A Presser Feet Kit (Cat 5)

Husqvarna Viking Clear A Presser Feet Kit (Cat 5)

Husqvarna Viking Clear A Presser Feet Kit (Cat 5) Kit contains: Clear Foot A, Clear A Edge Stitching Foot, Clear Edge/Joining Foot ..
£19.49
£14.62
Save £20.50 Was £39.99
 
Add Husqvarna Viking Clear A Presser Feet Kit (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking Clear A Presser Feet Kit (Cat 6)
Husqvarna Viking Clear A Presser Feet Kit (Cat 6)
Husqvarna Viking Clear A Presser Feet Kit (Cat 6)
Now £14.62

Husqvarna Viking Clear A Presser Feet Kit (Cat 6)

 

Kit contains: Clear Foot A, Clear A Edge Stitching Foot, Clear Edge/Joining Foot

 

Other information

CLEAR A FOOT

The Clear A Foot is used mainly for straight stitching and zig-zag stitching with a stitch length longer than 1.0. The clear view allows you to see exactly where you are stitching.
1. Snap on the Clear A Foot.
2. Select desired stitch.
3. Sew.

CLEAR A EDGE STITCHING FOOT

The Clear Edge Stitching Foot guides topstitching and edge stitching perfectly. The clear view allows you to see exactly where you are stitching.
1. Snap on the Clear A Edge Stitching Foot.
2. Place project under foot with the flange guide at the edge of the project.
3. Select straight stitch and adjust needle position so the stitching will be sewn at desired distance from edge.
4. For additional parallel rows of topstitching, adjust needle position and sew.

CLEAR EDGE/JOINING FOOT

The Clear Edge/Joining Foot guides topstitching and trims that are sewn to an edge or when two trims are sewn together. The clear view allows you to see exactly where you are stitching.
Joining:
1. Snap on the Clear A Edge/Joining Foot
2. Place edge of fabric against flange/guide.
3. Select the 3-step zig-zag, or bridging stitch,
length 2-3, width 4-7.
4. Sew.
Trims:
1. Snap on the Clear A Edge/Joining Foot
2. Place two pieces of fabric or trim, one on each side of the guide/flange of the foot.
3. Select the 3-step zig-zag, or bridging stitch,
length 2-3, width 4-7.
4. Sew. Keep fabric/trim against the flange/guide to join them.

Husqvarna Viking Clear A Presser Feet Kit (Cat 6)

Husqvarna Viking Clear A Presser Feet Kit (Cat 6)

Husqvarna Viking Clear A Presser Feet Kit (Cat 6) Kit contains: Clear Foot A, Clear A Edge Stitching Foot, Clear Edge/Joining Foot ..
£19.49
£14.62
Save £20.50 Was £39.99
 
Add Husqvarna Viking Clear A Presser Feet Kit (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking Clear A Presser Feet Kit (Cat 7)
Husqvarna Viking Clear A Presser Feet Kit (Cat 7)
Husqvarna Viking Clear A Presser Feet Kit (Cat 7)
Now £14.62

Husqvarna Viking Clear A Presser Feet Kit (Cat 7)

 

Kit contains: Clear Foot A, Clear A Edge Stitching Foot, Clear Edge/Joining Foot

 

Other information

CLEAR A FOOT

The Clear A Foot is used mainly for straight stitching and zig-zag stitching with a stitch length longer than 1.0. The clear view allows you to see exactly where you are stitching.
1. Snap on the Clear A Foot.
2. Select desired stitch.
3. Sew.

CLEAR A EDGE STITCHING FOOT

The Clear Edge Stitching Foot guides topstitching and edge stitching perfectly. The clear view allows you to see exactly where you are stitching.
1. Snap on the Clear A Edge Stitching Foot.
2. Place project under foot with the flange guide at the edge of the project.
3. Select straight stitch and adjust needle position so the stitching will be sewn at desired distance from edge.
4. For additional parallel rows of topstitching, adjust needle position and sew.

CLEAR EDGE/JOINING FOOT

The Clear Edge/Joining Foot guides topstitching and trims that are sewn to an edge or when two trims are sewn together. The clear view allows you to see exactly where you are stitching.
Joining:
1. Snap on the Clear A Edge/Joining Foot
2. Place edge of fabric against flange/guide.
3. Select the 3-step zig-zag, or bridging stitch,
length 2-3, width 4-7.
4. Sew.
Trims:
1. Snap on the Clear A Edge/Joining Foot
2. Place two pieces of fabric or trim, one on each side of the guide/flange of the foot.
3. Select the 3-step zig-zag, or bridging stitch,
length 2-3, width 4-7.
4. Sew. Keep fabric/trim against the flange/guide to join them.

Husqvarna Viking Clear A Presser Feet Kit (Cat 7)

Husqvarna Viking Clear A Presser Feet Kit (Cat 7)

Husqvarna Viking Clear A Presser Feet Kit (Cat 7) Kit contains: Clear Foot A, Clear A Edge Stitching Foot, Clear Edge/Joining Foot ..
£19.49
£14.62
Save £20.50 Was £39.99
 
Add Husqvarna Viking Clear A Presser Feet Kit (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Clear A Presser Feet Kit (100Q)
Husqvarna Viking Clear A Presser Feet Kit (100Q)
Husqvarna Viking Clear A Presser Feet Kit (100Q)
Now £14.62

Husqvarna Viking Clear A Presser Feet Kit (100Q)

 

Kit contains: Clear Foot A, Clear A Edge Stitching Foot, Clear Edge/Joining Foot

 

Other information

CLEAR A FOOT

The Clear A Foot is used mainly for straight stitching and zig-zag stitching with a stitch length longer than 1.0. The clear view allows you to see exactly where you are stitching.
1. Snap on the Clear A Foot.
2. Select desired stitch.
3. Sew.

CLEAR A EDGE STITCHING FOOT

The Clear Edge Stitching Foot guides topstitching and edge stitching perfectly. The clear view allows you to see exactly where you are stitching.
1. Snap on the Clear A Edge Stitching Foot.
2. Place project under foot with the flange guide at the edge of the project.
3. Select straight stitch and adjust needle position so the stitching will be sewn at desired distance from edge.
4. For additional parallel rows of topstitching, adjust needle position and sew.

CLEAR EDGE/JOINING FOOT

The Clear Edge/Joining Foot guides topstitching and trims that are sewn to an edge or when two trims are sewn together. The clear view allows you to see exactly where you are stitching.
Joining:
1. Snap on the Clear A Edge/Joining Foot
2. Place edge of fabric against flange/guide.
3. Select the 3-step zig-zag, or bridging stitch,
length 2-3, width 4-7.
4. Sew.
Trims:
1. Snap on the Clear A Edge/Joining Foot
2. Place two pieces of fabric or trim, one on each side of the guide/flange of the foot.
3. Select the 3-step zig-zag, or bridging stitch,
length 2-3, width 4-7.
4. Sew. Keep fabric/trim against the flange/guide to join them.

 

For Husqvarna Viking H Class 100Q Machine Only.
Husqvarna Viking Clear A Presser Feet Kit (100Q)

Husqvarna Viking Clear A Presser Feet Kit (100Q)

Husqvarna Viking Clear A Presser Feet Kit (100Q) Kit contains: Clear Foot A, Clear A Edge Stitching Foot, Clear Edge/Joining Foot ..
£19.49
£14.62
Save £20.50 Was £39.99
 
Add Husqvarna Viking Clear A Presser Feet Kit (100Q) to Shopping Basket Add To Basket
Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 6)
Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 6)
Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 6)
Now £11.24

Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 6)

 

Sew quick tucks in light weight fabrics. Use with INSPIRA® Twin Needle 1.6 mm (6200736-96). Straight stitch, length 1.5-2.0

 

Other information

1. Snap on Pin Tuck Foot.
2. Insert and thread 1.6 twin needle.
3. Sew. Tucks are formed by twin needle sewing as fabric tunnels into the groove on underside of foot.
4. Place tuck in outside groove of foot to guide next tuck.

Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 6)

Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 6)

Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 6)  Sew quick tucks in light weight fabrics. Use with INSPIRA® Twin Needle 1.6 mm (6200736..
£14.99
£11.24
Save £15.00 Was £29.99
 
Add Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 7)
Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 7)
Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 7)
Now £11.24

Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 7)

 

Sew quick tucks in light weight fabrics. Use with INSPIRA® Twin Needle 1.6 mm (6200736-96). Straight stitch, length 1.5-2.0

 

Other information

1. Snap on Pin Tuck Foot.
2. Insert and thread 1.6 twin needle.
3. Sew. Tucks are formed by twin needle sewing as fabric tunnels into the groove on underside of foot.
4. Place tuck in outside groove of foot to guide next tuck.

Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 7)

Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 7)

Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 7)  Sew quick tucks in light weight fabrics. Use with INSPIRA® Twin Needle 1.6 mm (6200736..
£14.99
£11.24
Save £15.00 Was £29.99
 
Add Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Overlocker Piping Foot with Corded Guide
Husqvarna Viking Overlocker Piping Foot with Corded Guide
Husqvarna Viking Overlocker Piping Foot with Corded Guide
Now £11.24

Husqvarna Viking Overlocker Piping Foot with Corded Guide.

 


Easily create your own piping:
1. Set the machine for Chainstitch.
2. Use the default stitch settings. Adjust if needed. Note: Although the machine recommends needle D, you will use needle E for this technique instead.
3. Snap on the Piping foot. (The cording guide is not used for this technique.)
4. Place the cord in the groove on the bottom of the foot and pull the cord tail behind the foot about 2½” (5cm). Note: ¼” - 5/8” (1.5 - 2.0mm) cord can be used.
5. Cut a strip of fabric on the bias, 1” (25mm) wide.
6. Wrap the fabric around the cord in the front of the foot. Slide the fabric under the foot.
7. Lower the presser foot and sew over the cord and fabric. (Hold the cord behind the foot as you begin to sew.)

Corded Tucks
Achieve a trapunto effect when a coverstitch is sewn over a cord in the guide.
1. Set the machine for coverstitch, wide. Note: Although the machine recommends needles C and E, you will use needles D and E for this technique instead.
2. Snap on the Piping foot and attach the cording guide.
3. Insert the cord into the round hole of the cording guide and position it in the groove on the bottom of the Piping foot.
4. Lay the fabric right side up on top of the cord. Slide it under the foot until it is underneath the needles.
5. Lower the needles into the fabric. Lower the presser foot and start to sew at a medium speed. (Hold the cord behind the foot as you begin to sew.)

Decorative Trim
Use decorative thread and ribbons to create special effects and unique trims.
1. Set the machine for 3-thread ornamental fl atlock stitch, wide with decorative thread in the loopers.
2. Snap on the standard presser foot and attach the cording guide as illustrated.
3. Insert a ribbon ¼” (6mm) wide right side down into the rectangular opening in the guide.
4. Place the ribbon under the presser foot to the right side of the needle, leaving a 2” (5cm) tail behind the foot.
5. The needle should go down into the machine just beyond, not into, the edge of the ribbon.
6. Sew over the ribbon to make a decorative trim. Tip: Make your decorated

Husqvarna Viking Overlocker Piping Foot with Corded Guide

Husqvarna Viking Overlocker Piping Foot with Corded Guide

Husqvarna Viking Overlocker Piping Foot with Corded Guide.   Easily create your own piping: 1. Set the machine for Chainstitch. 2. Use the default..
£14.99
£11.24
Save £15.01 Was £30.00
 
Add Husqvarna Viking Overlocker Piping Foot with Corded Guide to Shopping Basket Add To Basket
Husqvarna Viking Overlocker Blindhem and Lace Foot [Clearance]
Husqvarna Viking Overlocker Blindhem and Lace Foot [Clearance]
Husqvarna Viking Overlocker Blindhem and Lace Foot [Clearance]
Now £11.24

Husqvarna Viking Overlocker Blindhem and Lace Foot

 

The Blindhem Foot is used to sew blindhems and decorative stitches. The blind hem will make the stitches almost invisible from the right side of the garment.

 

Blind hem:
1. Set the overlock machine for the desired stitch.
2. Snap on the Blindhem Foot.
3. Fold and press the hem in place. Turn the hem back on itself toward the right side of the fabric. Leave ¼” (6mm) of the edge exposed. (See illustration.)
4. Place the hem under the foot with the fold against the guide on the foot.
5. Loosen the guide screw to adjust the guide so that the needle just catches the thread of the fold.
6. Guide the fabric as you sew, making sure the fold of the fabric is always against the guide.
7. Open the fabric and press lightly on the wrong side.
8. Test on a scrap piece of fabric before sewing your project.
 
Lace:
1. Set the overlock machine for the desired stitch
2. Snap on the Blindhem Foot.
3. Place the wrong side of the lace to the right side of the fabric.
4. Place under the foot with the fabric extending to the right of the guide.
The header of the lace will be against the left side of the guide.
5. Loosen the guide screw to adjust the guide so the needle just catches the header of the lace.
6. Guide the fabric as you sew, making sure the header of the lace is always against the guide.
7. When finished, open the lace flat. Fold the seam allowance to the back of the fabric and press.
8. If using insertion lace, repeat on the other side of the lace
 
For Husqvarna Viking Overlockers: Huskylock S21 & S25.
Husqvarna Viking Overlocker Blindhem and Lace Foot [Clearance]

Husqvarna Viking Overlocker Blindhem and Lace Foot [Clearance]

Husqvarna Viking Overlocker Blindhem and Lace Foot The Blindhem Foot is used to sew blindhems and decorative stitches. The blind hem will make the..
£14.99
£11.24
Save £15.01 Was £30.00
 
Add Husqvarna Viking Overlocker Blindhem and Lace Foot [Clearance] to Shopping Basket Add To Basket
Husqvarna Viking Overlocker Yarn Application Foot
Husqvarna Viking Overlocker Yarn Application Foot
Husqvarna Viking Overlocker Yarn Application Foot
Now £11.24
Husqvarna Viking Overlocker Yarn Application Foot
 
 
This foot is used for sewing yarns (cords, nylon gut) up to athickness of 1.0 mm. This produces an undulating or stiffer hem (e.g. on wedding dresses and valance).
 

Other information

Preparing the machine
• Needle: Right needle
• Stitch type: Two thread lower looper thread wrapped rolled hem or three
thread upper looper thread wrapped rolled hem
• Stitch length: 2 mm
• Differential feed lever: Normal position
• Upper knife: Working positon
Sewing
1. Place the fabric under the presser foot.
2. Thread cord (or nylon gut) through slot (A) and under finger (B) of the presser foot.
3. Test sew on a piece of fabric before starting to sew.
 
For Husqvarna Viking Overlockers: Huskylock S15.
Husqvarna Viking Overlocker Yarn Application Foot

Husqvarna Viking Overlocker Yarn Application Foot

Husqvarna Viking Overlocker Yarn Application Foot  This foot is used for sewing yarns (cords, nylon gut) up to athickness of 1.0 mm. This produces..
£14.99
£11.24
Save £15.00 Was £29.99
 
Add Husqvarna Viking Overlocker Yarn Application Foot to Shopping Basket Add To Basket
Husqvarna Viking Chenille Stitching Foot (Cat 7)
Husqvarna Viking Chenille Stitching Foot (Cat 7)
Husqvarna Viking Chenille Stitching Foot (Cat 7)
Now £10.87

Husqvarna Viking Chenille Stitching Foot (Cat 7)

 

This Chenille Stitching Foot makes it simple to embellish beautiful chenille effects. Can be used for beginners as well as experienced quilters and sewers.

 

Additional information

1. Thread with sewing thread on top and in the bobbin. 2. Use a minimum of three layers of chenille strips, 5/8” wide (16 mm) wide, for a beautiful effect. Place the strips in to the presser foot.
3. Snap on the Chenille Foot.
4. Place the fabric that will be embellished under the presser foot and the strips.
5. Select a straight stitch, a zigzag stitch or a three step zigzag stitch. Select short stitch length and a narrow stitch width,1,5 – 2.
6. Sew with a slow speed. The Chenille Foot will guide the strips onto the fabric where you want to have the chenille effect. For extra stability use Tear-Away Stabilizer underneath.
7. Add strips in rows if desired to complete your project.
8. Machine wash project on cold cycle, dry warm.

Alternative method: Spray with water, rub with stiff brush to fray thread, and dry with hair dryer.

 

Husqvarna Viking Chenille Stitching Foot (Cat 7)

Husqvarna Viking Chenille Stitching Foot (Cat 7)

Husqvarna Viking Chenille Stitching Foot (Cat 7) This Chenille Stitching Foot makes it simple to embellish beautiful chenille effects. Can be used..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Chenille Stitching Foot (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Chenille Stitching Foot (Cat 5)
Husqvarna Viking Chenille Stitching Foot (Cat 5)
Husqvarna Viking Chenille Stitching Foot (Cat 5)
Now £10.87

Husqvarna Viking Chenille Stitching Foot (Cat 5)

 

This Chenille Stitching Foot makes it simple to embellish beautiful chenille effects. Can be used for beginners as well as experienced quilters and sewers.

 

Additional information

1. Thread with sewing thread on top and in the bobbin. 2. Use a minimum of three layers of chenille strips, 5/8” wide (16 mm) wide, for a beautiful effect. Place the strips in to the presser foot.
3. Snap on the Chenille Foot.
4. Place the fabric that will be embellished under the presser foot and the strips.
5. Select a straight stitch, a zigzag stitch or a three step zigzag stitch. Select short stitch length and a narrow stitch width,1,5 – 2.
6. Sew with a slow speed. The Chenille Foot will guide the strips onto the fabric where you want to have the chenille effect. For extra stability use Tear-Away Stabilizer underneath.
7. Add strips in rows if desired to complete your project.
8. Machine wash project on cold cycle, dry warm.

Alternative method: Spray with water, rub with stiff brush to fray thread, and dry with hair dryer.

 

Husqvarna Viking Chenille Stitching Foot (Cat 5)

Husqvarna Viking Chenille Stitching Foot (Cat 5)

Husqvarna Viking Chenille Stitching Foot (Cat 5) This Chenille Stitching Foot makes it simple to embellish beautiful chenille effects. Can be used..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Chenille Stitching Foot (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking Open Toe Foot (Cat 5)
Husqvarna Viking Open Toe Foot (Cat 5)
Husqvarna Viking Open Toe Foot (Cat 5)
Now £10.87

Husqvarna Viking Open Toe Foot (Cat 5)

 

Satin Stitch Applique, Taper Stitches, and Decorative Stitches. Length and width as desired. The tunnel on the underside of the foot feeds smoothly over the stitches and the open front gives greater visibility for accuracy.

 

Other information

1. Snap on foot.
2. Set decorative or satin stitch.
3. Sew.

 
Husqvarna Viking Open Toe Foot (Cat 5)

Husqvarna Viking Open Toe Foot (Cat 5)

Husqvarna Viking Open Toe Foot (Cat 5) Satin Stitch Applique, Taper Stitches, and Decorative Stitches. Length and width as desired. The tunnel..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Open Toe Foot (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking Open Toe Foot (Cat 6)
Husqvarna Viking Open Toe Foot (Cat 6)
Husqvarna Viking Open Toe Foot (Cat 6)
Now £10.87

Husqvarna Viking Open Toe Foot (Cat 6)

 

Satin Stitch Applique, Taper Stitches, and Decorative Stitches. Length and width as desired. The tunnel on the underside of the foot feeds smoothly over the stitches and the open front gives greater visibility for accuracy.

 

Other information

1. Snap on foot.
2. Set decorative or satin stitch.
3. Sew.

Husqvarna Viking Open Toe Foot (Cat 6)

Husqvarna Viking Open Toe Foot (Cat 6)

Husqvarna Viking Open Toe Foot (Cat 6) Satin Stitch Applique, Taper Stitches, and Decorative Stitches. Length and width as desired. The tunnel..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Open Toe Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking Open Toe Foot (Cat 7)
Husqvarna Viking Open Toe Foot (Cat 7)
Husqvarna Viking Open Toe Foot (Cat 7)
Now £10.87

Husqvarna Viking Open Toe Foot (Cat 7)

 

Satin Stitch Applique, Taper Stitches, and Decorative Stitches. Length and width as desired. The tunnel on the underside of the foot feeds smoothly over the stitches and the open front gives greater visibility for accuracy.

 

Other information

1. Snap on foot.
2. Set decorative or satin stitch.
3. Sew.

Husqvarna Viking Open Toe Foot (Cat 7)

Husqvarna Viking Open Toe Foot (Cat 7)

Husqvarna Viking Open Toe Foot (Cat 7) Satin Stitch Applique, Taper Stitches, and Decorative Stitches. Length and width as desired. The tunnel..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Open Toe Foot (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Narrow Braid Cord Foot (Cat 7)
Husqvarna Viking Narrow Braid Cord Foot (Cat 7)
Husqvarna Viking Narrow Braid Cord Foot (Cat 7)
Now £10.87

Husqvarna Viking Narrow Braid Cord Foot (Cat 7).

 

Couch or stitch yarn and narrow braids and trims to embellish garments, gifts, and crafts. Zigzag stitch, length 1.5, width as wide as the trim or yarn. Snap on Narrow Braid Foot.

 

Additional information.

 

1. Place the yarn or trim into the hook/guide on the front of the foot and under the foot.

2. Stitch the braid in place.

The Gimping/Braiding guide accessory (412 55 44-45) will guide the yarn or trim as you sew.
Use stabilizer as needed.

Not suitable for Emerald series.

Husqvarna Viking Narrow Braid Cord Foot (Cat 7)

Husqvarna Viking Narrow Braid Cord Foot (Cat 7)

Husqvarna Viking Narrow Braid Cord Foot (Cat 7).  Couch or stitch yarn and narrow braids and trims to embellish garments, gifts, and crafts. Zigzag..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Narrow Braid Cord Foot (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Hemmer 10mm (Cat 7)
Husqvarna Viking Hemmer 10mm (Cat 7)
Husqvarna Viking Hemmer 10mm (Cat 7)
Now £10.87

Husqvarna Viking Hemmer 10mm (Cat 7).

Rolls a 10 mm double hem in light to medium weight fabrics. Straight stitch, length 2.5. Snap on the A-foot.

 

Additional information

1. Snap 10 mm Hemmer onto needle plate of machine.
2. Place fabric into the scroll/guide of the 10 mm Hemmer, rolling it up to the needle.
3. Sew. Do not help the fabric roll. Simply guide it.

Not suitable for Designer Diamond, Opal, Emerald, Topaz or Sapphire series.

Husqvarna Viking Hemmer 10mm (Cat 7)

Husqvarna Viking Hemmer 10mm (Cat 7)

Husqvarna Viking Hemmer 10mm (Cat 7). Rolls a 10 mm double hem in light to medium weight fabrics. Straight stitch, length 2.5. Snap on the A-foot. ..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Hemmer 10mm (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Hemmer 10mm (Cat 5)
Husqvarna Viking Hemmer 10mm (Cat 5)
Husqvarna Viking Hemmer 10mm (Cat 5)
Now £10.87

Husqvarna Viking Hemmer 10mm (Cat 5).

Rolls a 10 mm double hem in light to medium weight fabrics. Straight stitch, length 2.5. Snap on the A-foot.

 

Additional information

1. Snap 10 mm Hemmer onto needle plate of machine.
2. Place fabric into the scroll/guide of the 10 mm Hemmer, rolling it up to the needle.
3. Sew. Do not help the fabric roll. Simply guide it.

Not suitable for Designer Diamond, Opal, Emerald, Topaz or Sapphire series.

Husqvarna Viking Hemmer 10mm (Cat 5)

Husqvarna Viking Hemmer 10mm (Cat 5)

Husqvarna Viking Hemmer 10mm (Cat 5). Rolls a 10 mm double hem in light to medium weight fabrics. Straight stitch, length 2.5. Snap on the A-foot. ..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Hemmer 10mm (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking Narrow Braid Cord Foot (Cat 5)
Husqvarna Viking Narrow Braid Cord Foot (Cat 5)
Husqvarna Viking Narrow Braid Cord Foot (Cat 5)
Now £10.87

Husqvarna Viking Narrow Braid Cord Foot (Cat 5).

 

Couch or stitch yarn and narrow braids and trims to embellish garments, gifts, and crafts. Zigzag stitch, length 1.5, width as wide as the trim or yarn. Snap on Narrow Braid Foot.

 

Additional information.

 

1. Place the yarn or trim into the hook/guide on the front of the foot and under the foot.

2. Stitch the braid in place.

The Gimping/Braiding guide accessory (412 55 44-45) will guide the yarn or trim as you sew.
Use stabilizer as needed.

Not suitable for Emerald series.

Husqvarna Viking Narrow Braid Cord Foot (Cat 5)

Husqvarna Viking Narrow Braid Cord Foot (Cat 5)

Husqvarna Viking Narrow Braid Cord Foot (Cat 5).  Couch or stitch yarn and narrow braids and trims to embellish garments, gifts, and crafts. Zigzag..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Narrow Braid Cord Foot (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking Hemmer 10mm (Cat 6)
Husqvarna Viking Hemmer 10mm (Cat 6)
Husqvarna Viking Hemmer 10mm (Cat 6)
Now £10.87

Husqvarna Viking Hemmer 10mm (Cat 6).

Rolls a 10 mm double hem in light to medium weight fabrics. Straight stitch, length 2.5. Snap on the A-foot.

 

Additional information

1. Snap 10 mm Hemmer onto needle plate of machine.
2. Place fabric into the scroll/guide of the 10 mm Hemmer, rolling it up to the needle.
3. Sew. Do not help the fabric roll. Simply guide it.

Not suitable for Designer Diamond, Opal, Emerald, Topaz or Sapphire series.

Husqvarna Viking Hemmer 10mm (Cat 6)

Husqvarna Viking Hemmer 10mm (Cat 6)

Husqvarna Viking Hemmer 10mm (Cat 6). Rolls a 10 mm double hem in light to medium weight fabrics. Straight stitch, length 2.5. Snap on the A-foot. ..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Hemmer 10mm (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking Narrow Braid Cord Foot (Cat 6)
Husqvarna Viking Narrow Braid Cord Foot (Cat 6)
Husqvarna Viking Narrow Braid Cord Foot (Cat 6)
Now £10.87

Husqvarna Viking Narrow Braid Cord Foot (Cat 6).

 

Couch or stitch yarn and narrow braids and trims to embellish garments, gifts, and crafts. Zigzag stitch, length 1.5, width as wide as the trim or yarn. Snap on Narrow Braid Foot.

 

Additional information.

 

1. Place the yarn or trim into the hook/guide on the front of the foot and under the foot.

2. Stitch the braid in place.

The Gimping/Braiding guide accessory (412 55 44-45) will guide the yarn or trim as you sew.
Use stabilizer as needed.

Not suitable for Emerald series.

Husqvarna Viking Narrow Braid Cord Foot (Cat 6)

Husqvarna Viking Narrow Braid Cord Foot (Cat 6)

Husqvarna Viking Narrow Braid Cord Foot (Cat 6).  Couch or stitch yarn and narrow braids and trims to embellish garments, gifts, and crafts. Zigzag..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Narrow Braid Cord Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking Chenille Stitching Foot (Cat 6)
Husqvarna Viking Chenille Stitching Foot (Cat 6)
Husqvarna Viking Chenille Stitching Foot (Cat 6)
Now £10.87

Husqvarna Viking Chenille Stitching Foot (Cat 6)

 

This Chenille Stitching Foot makes it simple to embellish beautiful chenille effects. Can be used for beginners as well as experienced quilters and sewers.

 

Additional information

1. Thread with sewing thread on top and in the bobbin. 2. Use a minimum of three layers of chenille strips, 5/8” wide (16 mm) wide, for a beautiful effect. Place the strips in to the presser foot.
3. Snap on the Chenille Foot.
4. Place the fabric that will be embellished under the presser foot and the strips.
5. Select a straight stitch, a zigzag stitch or a three step zigzag stitch. Select short stitch length and a narrow stitch width,1,5 – 2.
6. Sew with a slow speed. The Chenille Foot will guide the strips onto the fabric where you want to have the chenille effect. For extra stability use Tear-Away Stabilizer underneath.
7. Add strips in rows if desired to complete your project.
8. Machine wash project on cold cycle, dry warm.

Alternative method: Spray with water, rub with stiff brush to fray thread, and dry with hair dryer.

 

Husqvarna Viking Chenille Stitching Foot (Cat 6)

Husqvarna Viking Chenille Stitching Foot (Cat 6)

Husqvarna Viking Chenille Stitching Foot (Cat 6) This Chenille Stitching Foot makes it simple to embellish beautiful chenille effects. Can be used..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Chenille Stitching Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 5)
Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 5)
Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 5)
Now £10.87

Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 5)

 

Sew quick tucks in light weight fabrics. Use with INSPIRA® Twin Needle 1.6 mm (6200736-96). Straight stitch, length 1.5-2.0

 

Other information

1. Snap on Pin Tuck Foot.
2. Insert and thread 1.6 twin needle.
3. Sew. Tucks are formed by twin needle sewing as fabric tunnels into the groove on underside of foot.
4. Place tuck in outside groove of foot to guide next tuck.

Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 5)

Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 5)

Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 5)  Sew quick tucks in light weight fabrics. Use with INSPIRA® Twin Needle 1.6 mm (6200736..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking 9 Groove Pin Tuck Foot (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 5)
Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 5)
Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 5)
Now £10.87

Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 5)

 

Sew quick tucks in light weight fabrics.
Use with Twin Needle 1,6 mm (6200736-96)
and Twin Needle 2 mm (6200738-96).
Straight stitch, length 2.0

Other information

1. Snap on Pin Tuck Foot.
2. Insert and thread 1.6 or 2.0 mm twin needle.
3. Sew. Tucks are formed by Twin Needle sewing as fabric tunnels into the groove on underside of foot.
4. Place tuck in outside groove of foot to guide next tuck.

 
Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 5)

Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 5)

Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 5) Sew quick tucks in light weight fabrics. Use with Twin Needle 1,6 mm (6200736-96) and Twin Needle..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 6)
Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 6)
Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 6)
Now £10.87

Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 6)

 

Sew quick tucks in light weight fabrics.
Use with Twin Needle 1,6 mm (6200736-96)
and Twin Needle 2 mm (6200738-96).
Straight stitch, length 2.0

Other information

1. Snap on Pin Tuck Foot.
2. Insert and thread 1.6 or 2.0 mm twin needle.
3. Sew. Tucks are formed by Twin Needle sewing as fabric tunnels into the groove on underside of foot.
4. Place tuck in outside groove of foot to guide next tuck.

 
Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 6)

Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 6)

Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 6) Sew quick tucks in light weight fabrics. Use with Twin Needle 1,6 mm (6200736-96) and Twin Needle..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 7)
Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 7)
Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 7)
Now £10.87

Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 7)

 

Sew quick tucks in light weight fabrics.
Use with Twin Needle 1,6 mm (6200736-96)
and Twin Needle 2 mm (6200738-96).
Straight stitch, length 2.0

Other information

1. Snap on Pin Tuck Foot.
2. Insert and thread 1.6 or 2.0 mm twin needle.
3. Sew. Tucks are formed by Twin Needle sewing as fabric tunnels into the groove on underside of foot.
4. Place tuck in outside groove of foot to guide next tuck.

 
Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 7)

Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 7)

Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 7) Sew quick tucks in light weight fabrics. Use with Twin Needle 1,6 mm (6200736-96) and Twin Needle..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking 7 Groove Pin Tuck Foot (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Marking Foot (Cat 5)
Husqvarna Viking Marking Foot (Cat 5)
Husqvarna Viking Marking Foot (Cat 5)
Now £10.87

Husqvarna Viking Marking Foot (Cat 5)

 

Transfer pattern markings with thread tacks. Use decoratively to create open/ladder seams or loops that can be fringe or animal hair. Zigzag stitch, length 1.5-2.5, width 3. Snap on Marking Foot. Reduce tension slightly.

 

Other information

Tailor Tacks:
1. Sew several stitches to mark. Do not tie off. Stitches will loop and be easy to remove.

Open/ladder seams:
1. Stitch two pieces of fabric right sides together.
2. Pull the fabrics to expose the open seam created by the looping threads.
3. Press seam allowances away from the open work and stitch down if desired.

Decorative Loops or Fringe:
1. Stitch with Marking Foot following desired design.
2. Finger press loops to one side and stitch along base of loops with a straight stitch to anchor them.
(For fringe, cut at center of loops.)

 

not for EMERALD™ 122, 118 and 116 machines.
Husqvarna Viking Marking Foot (Cat 5)

Husqvarna Viking Marking Foot (Cat 5)

Husqvarna Viking Marking Foot (Cat 5) Transfer pattern markings with thread tacks. Use decoratively to create open/ladder seams or loops that can..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Marking Foot (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking Marking Foot (Cat 6)
Husqvarna Viking Marking Foot (Cat 6)
Husqvarna Viking Marking Foot (Cat 6)
Now £10.87

Husqvarna Viking Marking Foot (Cat 6)

 

Transfer pattern markings with thread tacks. Use decoratively to create open/ladder seams or loops that can be fringe or animal hair. Zigzag stitch, length 1.5-2.5, width 3. Snap on Marking Foot. Reduce tension slightly.

 

Other information

Tailor Tacks:
1. Sew several stitches to mark. Do not tie off. Stitches will loop and be easy to remove.

Open/ladder seams:
1. Stitch two pieces of fabric right sides together.
2. Pull the fabrics to expose the open seam created by the looping threads.
3. Press seam allowances away from the open work and stitch down if desired.

Decorative Loops or Fringe:
1. Stitch with Marking Foot following desired design.
2. Finger press loops to one side and stitch along base of loops with a straight stitch to anchor them.
(For fringe, cut at center of loops.)

 

not for EMERALD™ 122, 118 and 116 machines.
Husqvarna Viking Marking Foot (Cat 6)

Husqvarna Viking Marking Foot (Cat 6)

Husqvarna Viking Marking Foot (Cat 6) Transfer pattern markings with thread tacks. Use decoratively to create open/ladder seams or loops that can..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Marking Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking Marking Foot (Cat 7)
Husqvarna Viking Marking Foot (Cat 7)
Husqvarna Viking Marking Foot (Cat 7)
Now £10.87

Husqvarna Viking Marking Foot (Cat 7)

 

Transfer pattern markings with thread tacks. Use decoratively to create open/ladder seams or loops that can be fringe or animal hair. Zigzag stitch, length 1.5-2.5, width 3. Snap on Marking Foot. Reduce tension slightly.

 

Other information

Tailor Tacks:
1. Sew several stitches to mark. Do not tie off. Stitches will loop and be easy to remove.

Open/ladder seams:
1. Stitch two pieces of fabric right sides together.
2. Pull the fabrics to expose the open seam created by the looping threads.
3. Press seam allowances away from the open work and stitch down if desired.

Decorative Loops or Fringe:
1. Stitch with Marking Foot following desired design.
2. Finger press loops to one side and stitch along base of loops with a straight stitch to anchor them.
(For fringe, cut at center of loops.)

 

not for EMERALD™ 122, 118 and 116 machines.
Husqvarna Viking Marking Foot (Cat 7)

Husqvarna Viking Marking Foot (Cat 7)

Husqvarna Viking Marking Foot (Cat 7) Transfer pattern markings with thread tacks. Use decoratively to create open/ladder seams or loops that can..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Marking Foot (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Overlocker Flat Trim Foot
Husqvarna Viking Overlocker Flat Trim Foot
Husqvarna Viking Overlocker Flat Trim Foot
Now £10.87

Husqvarna Viking Overlocker Flat Trim Foot

 

 

With the HUSKYLOCK™ Flat Trim foot, you can easily add lace and trims to the top of thefabric with a coverstitch to create beautiful decorative edges and effects.

 

Other information

1. Set the machine for a Coverstitch wide.
2. Snap on the Flat Trim foot.
3. Use default stitch settings. Adjust if needed.
4. Insert the fabric edge into the lower section on the left side of the foot. Slide the fabric under the foot and under the needles.
5. Insert the trim into the upper section on the right side of the foot. Slide the trim toward the back of the foot beyond the needles, leaving a short tail of trim behind the needles.
Tip: Use tweezers to slide the fabric andthe trim to the correct position under the needles.
6. Lower the needles into the trim and the fabric. Lower the Flat Trim foot
7. As you sew, hold the fabric in your left hand and the trim in your right hand.
Tip: If you want a finished fabric edge, press a ¼” (6mm) hem to the right side of the fabric before inserting the fabric into the Flat Trim foot. The lace will cover the fabric raw edge when sewn in place.

 

For Huskylock s21 and s25 machines.

Husqvarna Viking Overlocker Flat Trim Foot

Husqvarna Viking Overlocker Flat Trim Foot

Husqvarna Viking Overlocker Flat Trim Foot  With the HUSKYLOCK™ Flat Trim foot, you can easily add lace and trims to the top of thefabric..
£14.49
£10.87
Save £15.51 Was £30.00
 
Add Husqvarna Viking Overlocker Flat Trim Foot to Shopping Basket Add To Basket
Husqvarna Viking Narrow Braid Cord Foot (100Q)
Husqvarna Viking Narrow Braid Cord Foot (100Q)
Husqvarna Viking Narrow Braid Cord Foot (100Q)
Now £10.87

Husqvarna Viking Narrow Braid Cord Foot (100Q).

 

Couch or stitch yarn and narrow braids and trims to embellish garments, gifts, and crafts. Zigzag stitch, length 1.5, width as wide as the trim or yarn. Snap on Narrow Braid Foot.

 

Additional information.

 

1. Place the yarn or trim into the hook/guide on the front of the foot and under the foot.

2. Stitch the braid in place.

The Gimping/Braiding guide accessory (412 55 44-45) will guide the yarn or trim as you sew.
Use stabilizer as needed.

 

For Husqvarna Viking H Class 100Q Machine Only.

Husqvarna Viking Narrow Braid Cord Foot (100Q)

Husqvarna Viking Narrow Braid Cord Foot (100Q)

Husqvarna Viking Narrow Braid Cord Foot (100Q).  Couch or stitch yarn and narrow braids and trims to embellish garments, gifts, and crafts. Zigzag..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Narrow Braid Cord Foot (100Q) to Shopping Basket Add To Basket
Husqvarna Viking Chenille Stitching Foot (100Q)
Husqvarna Viking Chenille Stitching Foot (100Q)
Husqvarna Viking Chenille Stitching Foot (100Q)
Now £10.87

Husqvarna Viking Chenille Stitching Foot (100Q)

 

This Chenille Stitching Foot makes it simple to embellish beautiful chenille effects. Can be used for beginners as well as experienced quilters and sewers.

 

Additional information

1. Thread with sewing thread on top and in the bobbin. 2. Use a minimum of three layers of chenille strips, 5/8” wide (16 mm) wide, for a beautiful effect. Place the strips in to the presser foot.
3. Snap on the Chenille Foot.
4. Place the fabric that will be embellished under the presser foot and the strips.
5. Select a straight stitch, a zigzag stitch or a three step zigzag stitch. Select short stitch length and a narrow stitch width,1,5 – 2.
6. Sew with a slow speed. The Chenille Foot will guide the strips onto the fabric where you want to have the chenille effect. For extra stability use Tear-Away Stabilizer underneath.
7. Add strips in rows if desired to complete your project.
8. Machine wash project on cold cycle, dry warm.

Alternative method: Spray with water, rub with stiff brush to fray thread, and dry with hair dryer.

 

For Husqvarna Viking H Class 100Q Machine Only.

Husqvarna Viking Chenille Stitching Foot (100Q)

Husqvarna Viking Chenille Stitching Foot (100Q)

Husqvarna Viking Chenille Stitching Foot (100Q) This Chenille Stitching Foot makes it simple to embellish beautiful chenille effects. Can be used..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Chenille Stitching Foot (100Q) to Shopping Basket Add To Basket
Husqvarna Viking 9 Groove Pin Tuck Foot (100Q)
Husqvarna Viking 9 Groove Pin Tuck Foot (100Q)
Husqvarna Viking 9 Groove Pin Tuck Foot (100Q)
Now £10.87

Husqvarna Viking 9 Groove Pin Tuck Foot (100Q)

 

 

Sew quick tucks in light weight fabrics. Use with INSPIRA® Twin Needle 1.6 mm (6200736-96). Straight stitch, length 1.5-2.0

 

Other information

1. Snap on Pin Tuck Foot.
2. Insert and thread 1.6 twin needle.
3. Sew. Tucks are formed by twin needle sewing as fabric tunnels into the groove on underside of foot.
4. Place tuck in outside groove of foot to guide next tuck.

 

For Husqvarna Viking H Class 100Q Machine Only.

Husqvarna Viking 9 Groove Pin Tuck Foot (100Q)

Husqvarna Viking 9 Groove Pin Tuck Foot (100Q)

Husqvarna Viking 9 Groove Pin Tuck Foot (100Q)  Sew quick tucks in light weight fabrics. Use with INSPIRA® Twin Needle 1.6 mm (6200736..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking 9 Groove Pin Tuck Foot (100Q) to Shopping Basket Add To Basket
Husqvarna Viking 7 Groove Pin Tuck Foot (100Q)
Husqvarna Viking 7 Groove Pin Tuck Foot (100Q)
Husqvarna Viking 7 Groove Pin Tuck Foot (100Q)
Now £10.87

Husqvarna Viking 7 Groove Pin Tuck Foot (100Q)

 

Sew quick tucks in light weight fabrics.
Use with Twin Needle 1,6 mm (6200736-96)
and Twin Needle 2 mm (6200738-96).
Straight stitch, length 2.0

Other information

1. Snap on Pin Tuck Foot.
2. Insert and thread 1.6 or 2.0 mm twin needle.
3. Sew. Tucks are formed by Twin Needle sewing as fabric tunnels into the groove on underside of foot.
4. Place tuck in outside groove of foot to guide next tuck.

 

For Husqvarna Viking H Class 100Q Machine Only.
Husqvarna Viking 7 Groove Pin Tuck Foot (100Q)

Husqvarna Viking 7 Groove Pin Tuck Foot (100Q)

Husqvarna Viking 7 Groove Pin Tuck Foot (100Q) Sew quick tucks in light weight fabrics. Use with Twin Needle 1,6 mm (6200736-96) and Twin Needle..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking 7 Groove Pin Tuck Foot (100Q) to Shopping Basket Add To Basket
Husqvarna Viking Marking Foot (100Q)
Husqvarna Viking Marking Foot (100Q)
Husqvarna Viking Marking Foot (100Q)
Now £10.87

Husqvarna Viking Marking Foot (100Q)

 

Transfer pattern markings with thread tacks. Use decoratively to create open/ladder seams or loops that can be fringe or animal hair. Zigzag stitch, length 1.5-2.5, width 3. Snap on Marking Foot. Reduce tension slightly.

 

Other information

Tailor Tacks:
1. Sew several stitches to mark. Do not tie off. Stitches will loop and be easy to remove.

Open/ladder seams:
1. Stitch two pieces of fabric right sides together.
2. Pull the fabrics to expose the open seam created by the looping threads.
3. Press seam allowances away from the open work and stitch down if desired.

Decorative Loops or Fringe:
1. Stitch with Marking Foot following desired design.
2. Finger press loops to one side and stitch along base of loops with a straight stitch to anchor them.
(For fringe, cut at center of loops.)

 

For Husqvarna Viking H Class 100Q Machine Only.
Husqvarna Viking Marking Foot (100Q)

Husqvarna Viking Marking Foot (100Q)

Husqvarna Viking Marking Foot (100Q) Transfer pattern markings with thread tacks. Use decoratively to create open/ladder seams or loops that can..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Marking Foot (100Q) to Shopping Basket Add To Basket
Husqvarna Viking Open Toe Foot (100Q)
Husqvarna Viking Open Toe Foot (100Q)
Husqvarna Viking Open Toe Foot (100Q)
Now £10.87

Husqvarna Viking Open Toe Foot (100Q)

 

Satin Stitch Applique, Taper Stitches, and Decorative Stitches. Length and width as desired. The tunnel on the underside of the foot feeds smoothly over the stitches and the open front gives greater visibility for accuracy.

 

Other information

1. Snap on foot.
2. Set decorative or satin stitch.
3. Sew.

 

For Husqvarna Viking H Class 100Q Machine Only.

 
Husqvarna Viking Open Toe Foot (100Q)

Husqvarna Viking Open Toe Foot (100Q)

Husqvarna Viking Open Toe Foot (100Q) Satin Stitch Applique, Taper Stitches, and Decorative Stitches. Length and width as desired. The tunnel..
£14.49
£10.87
Save £15.50 Was £29.99
 
Add Husqvarna Viking Open Toe Foot (100Q) to Shopping Basket Add To Basket
Husqvarna Viking Changeable Open Toe Foot (Cat 5)
Husqvarna Viking Changeable Open Toe Foot (Cat 5)
Husqvarna Viking Changeable Open Toe Foot (Cat 5)
Now £10.12

Husqvarna Viking Changeable Open Toe Foot (Cat 5)

 

Use the Changeable Open Toe Foot when sewing Satin stitch applique, Taper stitches and Decorative stitches. The tunnel on the underside of the foot feeds smoothly and the open front gives greater visibility and a great overview of the stitches.

not for EMERALD™ 122, 118 and 116 machines.

 

FOR 920219096 INTERCHANGEABLE DUAL FEED FOOT

Husqvarna Viking Changeable Open Toe Foot (Cat 5)

Husqvarna Viking Changeable Open Toe Foot (Cat 5)

Husqvarna Viking Changeable Open Toe Foot (Cat 5) Use the Changeable Open Toe Foot when sewing Satin stitch applique, Taper stitches and Decorative..
£13.49
£10.12
Save £14.26 Was £27.75
 
Add Husqvarna Viking Changeable Open Toe Foot (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking Changeable Open Toe Foot (Cat 6)
Husqvarna Viking Changeable Open Toe Foot (Cat 6)
Husqvarna Viking Changeable Open Toe Foot (Cat 6)
Now £10.12

Husqvarna Viking Changeable Open Toe Foot (Cat 6)

 

Use the Changeable Open Toe Foot when sewing Satin stitch applique, Taper stitches and Decorative stitches. The tunnel on the underside of the foot feeds smoothly and the open front gives greater visibility and a great overview of the stitches.

not for EMERALD™ 122, 118 and 116 machines.

 

FOR 920219096 INTERCHANGEABLE DUAL FEED FOOT

Husqvarna Viking Changeable Open Toe Foot (Cat 6)

Husqvarna Viking Changeable Open Toe Foot (Cat 6)

Husqvarna Viking Changeable Open Toe Foot (Cat 6) Use the Changeable Open Toe Foot when sewing Satin stitch applique, Taper stitches and Decorative..
£13.49
£10.12
Save £14.26 Was £27.75
 
Add Husqvarna Viking Changeable Open Toe Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking Changeable Open Toe Foot (Cat 7)
Husqvarna Viking Changeable Open Toe Foot (Cat 7)
Husqvarna Viking Changeable Open Toe Foot (Cat 7)
Now £10.12

Husqvarna Viking Changeable Open Toe Foot (Cat 7)

 

Use the Changeable Open Toe Foot when sewing Satin stitch applique, Taper stitches and Decorative stitches. The tunnel on the underside of the foot feeds smoothly and the open front gives greater visibility and a great overview of the stitches.

not for EMERALD™ 122, 118 and 116 machines.

 

FOR 920219096 INTERCHANGEABLE DUAL FEED FOOT

Husqvarna Viking Changeable Open Toe Foot (Cat 7)

Husqvarna Viking Changeable Open Toe Foot (Cat 7)

Husqvarna Viking Changeable Open Toe Foot (Cat 7) Use the Changeable Open Toe Foot when sewing Satin stitch applique, Taper stitches and Decorative..
£13.49
£10.12
Save £14.26 Was £27.75
 
Add Husqvarna Viking Changeable Open Toe Foot (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Changeable Open Toe Foot (100Q)
Husqvarna Viking Changeable Open Toe Foot (100Q)
Husqvarna Viking Changeable Open Toe Foot (100Q)
Now £10.12

Husqvarna Viking Changeable Open Toe Foot (100Q)

 

Use the Changeable Open Toe Foot when sewing Satin stitch applique, Taper stitches and Decorative stitches. The tunnel on the underside of the foot feeds smoothly and the open front gives greater visibility and a great overview of the stitches.

FOR 920219096 INTERCHANGEABLE DUAL FEED FOOT

 

For Husqvarna Viking H Class 100Q Machine Only.

Husqvarna Viking Changeable Open Toe Foot (100Q)

Husqvarna Viking Changeable Open Toe Foot (100Q)

Husqvarna Viking Changeable Open Toe Foot (100Q) Use the Changeable Open Toe Foot when sewing Satin stitch applique, Taper stitches and Decorative..
£13.49
£10.12
Save £14.26 Was £27.75
 
Add Husqvarna Viking Changeable Open Toe Foot (100Q) to Shopping Basket Add To Basket
Husqvarna Viking Clear Open Toe Foot (Cat 6)
Husqvarna Viking Clear Open Toe Foot (Cat 6)
Husqvarna Viking Clear Open Toe Foot (Cat 6)
Now £9.74

Husqvarna Viking Clear 1/4 Piecing Foot (Cat 6)

 

Sew taper stitches and decorative stitches easily. The clear view through the foot makes it easy to match rows of stitches perfectly. The tunnel on the underside of the foot feeds smoothly plus the clear view and open front gives greater visibility and a great overview of the stitches.

 

 

Other information

1. Snap on the Clear Open Toe Foot.
2. Choose a decorative or a satin stitch.
3. For best result use a marking pen to draw lines for exact guiding of the foot.
4. Sew.

 
 
Husqvarna Viking Clear Open Toe Foot (Cat 6)

Husqvarna Viking Clear Open Toe Foot (Cat 6)

Husqvarna Viking Clear 1/4 Piecing Foot (Cat 6) Sew taper stitches and decorative stitches easily. The clear view through the foot makes it..
£12.99
£9.74
Save £12.00 Was £24.99
 
Add Husqvarna Viking Clear Open Toe Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking Clear Open Toe Foot (Cat 5)
Husqvarna Viking Clear Open Toe Foot (Cat 5)
Husqvarna Viking Clear Open Toe Foot (Cat 5)
Now £9.74

Husqvarna Viking Clear 1/4 Piecing Foot (Cat 5)

 

Sew taper stitches and decorative stitches easily. The clear view through the foot makes it easy to match rows of stitches perfectly. The tunnel on the underside of the foot feeds smoothly plus the clear view and open front gives greater visibility and a great overview of the stitches.

 

 

Other information

1. Snap on the Clear Open Toe Foot.
2. Choose a decorative or a satin stitch.
3. For best result use a marking pen to draw lines for exact guiding of the foot.
4. Sew.

 
Husqvarna Viking Clear Open Toe Foot (Cat 5)

Husqvarna Viking Clear Open Toe Foot (Cat 5)

Husqvarna Viking Clear 1/4 Piecing Foot (Cat 5) Sew taper stitches and decorative stitches easily. The clear view through the foot makes it..
£12.99
£9.74
Save £12.00 Was £24.99
 
Add Husqvarna Viking Clear Open Toe Foot (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking Clear Open Toe Foot (Cat 7)
Husqvarna Viking Clear Open Toe Foot (Cat 7)
Husqvarna Viking Clear Open Toe Foot (Cat 7)
Now £9.74

Husqvarna Viking Clear 1/4 Piecing Foot (Cat 7)

 

Sew taper stitches and decorative stitches easily. The clear view through the foot makes it easy to match rows of stitches perfectly. The tunnel on the underside of the foot feeds smoothly plus the clear view and open front gives greater visibility and a great overview of the stitches.

 

 

Other information

1. Snap on the Clear Open Toe Foot.
2. Choose a decorative or a satin stitch.
3. For best result use a marking pen to draw lines for exact guiding of the foot.
4. Sew.

 
 
Husqvarna Viking Clear Open Toe Foot (Cat 7)

Husqvarna Viking Clear Open Toe Foot (Cat 7)

Husqvarna Viking Clear 1/4 Piecing Foot (Cat 7) Sew taper stitches and decorative stitches easily. The clear view through the foot makes it..
£12.99
£9.74
Save £12.00 Was £24.99
 
Add Husqvarna Viking Clear Open Toe Foot (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Clear B Edge Stitching Foot (Cat 5)
Husqvarna Viking Clear B Edge Stitching Foot (Cat 5)
Husqvarna Viking Clear B Edge Stitching Foot (Cat 5)
Now £9.74

Husqvarna Viking Clear B Edge Stitching Foot (Cat 5)

 

The Clear B Edge Stitching Foot guides decorative stitching along an edge perfectly. The tunnel on the bottom of the foot allows stitches to form perfectly and feed flawlessly. The flange along the edge of the foot keeps the distance between the edge of the fabric and the stitching consistent. Anytime your Sewing Advisor or Graphic Display recommends the “B” foot, use the Clear B Edge Stitching Foot when sewing along an edge.

Other information

1. Snap on the Clear B Edge Stitching Foot.

2. Place your project under the foot with the flange guide at the edge of the project.

3. Select the decorative stitch of your choice.

4. Sew.

 

Husqvarna Viking Clear B Edge Stitching Foot (Cat 5)

Husqvarna Viking Clear B Edge Stitching Foot (Cat 5)

Husqvarna Viking Clear B Edge Stitching Foot (Cat 5) The Clear B Edge Stitching Foot guides decorative stitching along an edge perfectly. The tunnel..
£12.99
£9.74
Save £12.00 Was £24.99
 
Add Husqvarna Viking Clear B Edge Stitching Foot (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking Clear B Edge Stitching Foot (Cat 6)
Husqvarna Viking Clear B Edge Stitching Foot (Cat 6)
Husqvarna Viking Clear B Edge Stitching Foot (Cat 6)
Now £9.74

Husqvarna Viking Clear B Edge Stitching Foot (Cat 6)

 

The Clear B Edge Stitching Foot guides decorative stitching along an edge perfectly. The tunnel on the bottom of the foot allows stitches to form perfectly and feed flawlessly. The flange along the edge of the foot keeps the distance between the edge of the fabric and the stitching consistent. Anytime your Sewing Advisor or Graphic Display recommends the “B” foot, use the Clear B Edge Stitching Foot when sewing along an edge.

Other information

1. Snap on the Clear B Edge Stitching Foot.

2. Place your project under the foot with the flange guide at the edge of the project.

3. Select the decorative stitch of your choice.

4. Sew.

 

Husqvarna Viking Clear B Edge Stitching Foot (Cat 6)

Husqvarna Viking Clear B Edge Stitching Foot (Cat 6)

Husqvarna Viking Clear B Edge Stitching Foot (Cat 6) The Clear B Edge Stitching Foot guides decorative stitching along an edge perfectly. The tunnel..
£12.99
£9.74
Save £12.00 Was £24.99
 
Add Husqvarna Viking Clear B Edge Stitching Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking Clear B Edge Stitching Foot (Cat 7)
Husqvarna Viking Clear B Edge Stitching Foot (Cat 7)
Husqvarna Viking Clear B Edge Stitching Foot (Cat 7)
Now £9.74

Husqvarna Viking Clear B Edge Stitching Foot (Cat 7)

 

The Clear B Edge Stitching Foot guides decorative stitching along an edge perfectly. The tunnel on the bottom of the foot allows stitches to form perfectly and feed flawlessly. The flange along the edge of the foot keeps the distance between the edge of the fabric and the stitching consistent. Anytime your Sewing Advisor or Graphic Display recommends the “B” foot, use the Clear B Edge Stitching Foot when sewing along an edge.

Other information

1. Snap on the Clear B Edge Stitching Foot.

2. Place your project under the foot with the flange guide at the edge of the project.

3. Select the decorative stitch of your choice.

4. Sew.

 

Husqvarna Viking Clear B Edge Stitching Foot (Cat 7)

Husqvarna Viking Clear B Edge Stitching Foot (Cat 7)

Husqvarna Viking Clear B Edge Stitching Foot (Cat 7) The Clear B Edge Stitching Foot guides decorative stitching along an edge perfectly. The tunnel..
£12.99
£9.74
Save £12.00 Was £24.99
 
Add Husqvarna Viking Clear B Edge Stitching Foot (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Clear B Edge Stitching Foot (100Q)
Husqvarna Viking Clear B Edge Stitching Foot (100Q)
Husqvarna Viking Clear B Edge Stitching Foot (100Q)
Now £9.74

Husqvarna Viking Clear B Edge Stitching Foot (100Q)

 

The Clear B Edge Stitching Foot guides decorative stitching along an edge perfectly. The tunnel on the bottom of the foot allows stitches to form perfectly and feed flawlessly. The flange along the edge of the foot keeps the distance between the edge of the fabric and the stitching consistent. Anytime your Sewing Advisor or Graphic Display recommends the “B” foot, use the Clear B Edge Stitching Foot when sewing along an edge.

Other information

1. Snap on the Clear B Edge Stitching Foot.

2. Place your project under the foot with the flange guide at the edge of the project.

3. Select the decorative stitch of your choice.

4. Sew.

 

For Husqvarna Viking H Class 100Q Machine Only.

Husqvarna Viking Clear B Edge Stitching Foot (100Q)

Husqvarna Viking Clear B Edge Stitching Foot (100Q)

Husqvarna Viking Clear B Edge Stitching Foot (100Q) The Clear B Edge Stitching Foot guides decorative stitching along an edge perfectly. The tunnel..
£12.99
£9.74
Save £12.00 Was £24.99
 
Add Husqvarna Viking Clear B Edge Stitching Foot (100Q) to Shopping Basket Add To Basket
Husqvarna Viking Clear Open Toe Foot (100Q)
Husqvarna Viking Clear Open Toe Foot (100Q)
Husqvarna Viking Clear Open Toe Foot (100Q)
Now £9.74

Husqvarna Viking Clear 1/4 Piecing Foot (100Q)

 

Sew taper stitches and decorative stitches easily. The clear view through the foot makes it easy to match rows of stitches perfectly. The tunnel on the underside of the foot feeds smoothly plus the clear view and open front gives greater visibility and a great overview of the stitches.

 

 

Other information

1. Snap on the Clear Open Toe Foot.
2. Choose a decorative or a satin stitch.
3. For best result use a marking pen to draw lines for exact guiding of the foot.
4. Sew.

 

For Husqvarna Viking H Class 100Q Machine Only.

 
Husqvarna Viking Clear Open Toe Foot (100Q)

Husqvarna Viking Clear Open Toe Foot (100Q)

Husqvarna Viking Clear 1/4 Piecing Foot (100Q) Sew taper stitches and decorative stitches easily. The clear view through the foot makes it easy..
£12.99
£9.74
Save £12.00 Was £24.99
 
Add Husqvarna Viking Clear Open Toe Foot (100Q) to Shopping Basket Add To Basket
Husqvarna Viking Gimping Foot (Cat 7)
Husqvarna Viking Gimping Foot (Cat 7)
Husqvarna Viking Gimping Foot (Cat 7)
Now £9.37

Husqvarna Viking Gimping Foot (Cat 7).

 

This Gimping Foot can be used to create a technique of dimensional satin stitch. The Gimp thread is guided by the foot as the stitch is sewn over it.

 

Additional information.

 

1. Thread a 40 weight Sulky rayon thread on top, embroidery bobbin thread on the bobbin.
2. Insert the gimp thread into the guide on the foot. Place the spool or length of gimp thread so it will feed smoothly into the foot as you sew.
3. Select a narrow satin stitch. (Follow the instructions for applique but width should be just wide enough for the zigzag to stitch over the gimp.) On computer machines, select the preprogrammed satin stitch and fine tune the length and width to sew over the gimp. On other machines; select a zigzag stitch, length 0.3–0.5, width 1.5–2.
4. Mark a design onto your fabric and sew over it. The design will be outlined in dimensional satin stitch.

Note: Gimping/Braiding Guide (412 55 44-45) sold separately.

Not suitable for Emerald series.

 

Husqvarna Viking Gimping Foot (Cat 7)

Husqvarna Viking Gimping Foot (Cat 7)

Husqvarna Viking Gimping Foot (Cat 7).  This Gimping Foot can be used to create a technique of dimensional satin stitch. The Gimp thread is guided..
£12.49
£9.37
Save £12.51 Was £25.00
 
Add Husqvarna Viking Gimping Foot (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Gimping Foot (Cat 5)
Husqvarna Viking Gimping Foot (Cat 5)
Husqvarna Viking Gimping Foot (Cat 5)
Now £9.37

Husqvarna Viking Gimping Foot (Cat 5).

 

This Gimping Foot can be used to create a technique of dimensional satin stitch. The Gimp thread is guided by the foot as the stitch is sewn over it.

 

Additional information.

 

1. Thread a 40 weight Sulky rayon thread on top, embroidery bobbin thread on the bobbin.
2. Insert the gimp thread into the guide on the foot. Place the spool or length of gimp thread so it will feed smoothly into the foot as you sew.
3. Select a narrow satin stitch. (Follow the instructions for applique but width should be just wide enough for the zigzag to stitch over the gimp.) On computer machines, select the preprogrammed satin stitch and fine tune the length and width to sew over the gimp. On other machines; select a zigzag stitch, length 0.3–0.5, width 1.5–2.
4. Mark a design onto your fabric and sew over it. The design will be outlined in dimensional satin stitch.

Note: Gimping/Braiding Guide (412 55 44-45) sold separately.

Not suitable for Emerald series.

Husqvarna Viking Gimping Foot (Cat 5)

Husqvarna Viking Gimping Foot (Cat 5)

Husqvarna Viking Gimping Foot (Cat 5).  This Gimping Foot can be used to create a technique of dimensional satin stitch. The Gimp thread is guided..
£12.49
£9.37
Save £12.51 Was £25.00
 
Add Husqvarna Viking Gimping Foot (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking Gimping Foot (Cat 6)
Husqvarna Viking Gimping Foot (Cat 6)
Husqvarna Viking Gimping Foot (Cat 6)
Now £9.37

Husqvarna Viking Gimping Foot (Cat 6).

 

This Gimping Foot can be used to create a technique of dimensional satin stitch. The Gimp thread is guided by the foot as the stitch is sewn over it.

 

Additional information.

 

1. Thread a 40 weight Sulky rayon thread on top, embroidery bobbin thread on the bobbin.
2. Insert the gimp thread into the guide on the foot. Place the spool or length of gimp thread so it will feed smoothly into the foot as you sew.
3. Select a narrow satin stitch. (Follow the instructions for applique but width should be just wide enough for the zigzag to stitch over the gimp.) On computer machines, select the preprogrammed satin stitch and fine tune the length and width to sew over the gimp. On other machines; select a zigzag stitch, length 0.3–0.5, width 1.5–2.
4. Mark a design onto your fabric and sew over it. The design will be outlined in dimensional satin stitch.

Note: Gimping/Braiding Guide (412 55 44-45) sold separately.

Not suitable for Emerald series.

Husqvarna Viking Gimping Foot (Cat 6)

Husqvarna Viking Gimping Foot (Cat 6)

Husqvarna Viking Gimping Foot (Cat 6).  This Gimping Foot can be used to create a technique of dimensional satin stitch. The Gimp thread is guided..
£12.49
£9.37
Save £12.51 Was £25.00
 
Add Husqvarna Viking Gimping Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking Edge Joining Foot (Cat 5)
Husqvarna Viking Edge Joining Foot (Cat 5)
Husqvarna Viking Edge Joining Foot (Cat 5)
Now £9.37

Husqvarna Viking Edge Joining Foot (Cat 5)

 

 

Guides topstitching. Guides trims that are sewn to an edge or when two trims are sewn together. Edge/stitch: Straight stitch, left needle position, length 2–4.

 

Other information

1. Snap on the Edge/Joining Foot.
2. Place edge of fabric against flange/guide. Sew. Topstitch: Straight stitch, center needle position, length 2–4.

1. Snap on Edge/Joining Foot.
2. Place flange/guide at line to topstitch. Sew.
Joining: 3 step zigzag, or bridging stitch, length 2–3, width 4–7.

1. Place two pieces of fabric or trim, one on each side of the guide/flange of the foot.
2. Sew. Keep fabric/trim against the flange/guide to join them.

Husqvarna Viking Edge Joining Foot (Cat 5)

Husqvarna Viking Edge Joining Foot (Cat 5)

Husqvarna Viking Edge Joining Foot (Cat 5)  Guides topstitching. Guides trims that are sewn to an edge or when two trims are sewn together...
£12.49
£9.37
Save £12.51 Was £25.00
 
Add Husqvarna Viking Edge Joining Foot (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking Edge Joining Foot (Cat 6)
Husqvarna Viking Edge Joining Foot (Cat 6)
Husqvarna Viking Edge Joining Foot (Cat 6)
Now £9.37

Husqvarna Viking Edge Joining Foot (Cat 6)

 

 

Guides topstitching. Guides trims that are sewn to an edge or when two trims are sewn together. Edge/stitch: Straight stitch, left needle position, length 2–4.

 

Other information

1. Snap on the Edge/Joining Foot.
2. Place edge of fabric against flange/guide. Sew. Topstitch: Straight stitch, center needle position, length 2–4.

1. Snap on Edge/Joining Foot.
2. Place flange/guide at line to topstitch. Sew.
Joining: 3 step zigzag, or bridging stitch, length 2–3, width 4–7.

1. Place two pieces of fabric or trim, one on each side of the guide/flange of the foot.
2. Sew. Keep fabric/trim against the flange/guide to join them.

Husqvarna Viking Edge Joining Foot (Cat 6)

Husqvarna Viking Edge Joining Foot (Cat 6)

Husqvarna Viking Edge Joining Foot (Cat 6)  Guides topstitching. Guides trims that are sewn to an edge or when two trims are sewn together...
£12.49
£9.37
Save £12.51 Was £25.00
 
Add Husqvarna Viking Edge Joining Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking Edge Joining Foot (Cat 7)
Husqvarna Viking Edge Joining Foot (Cat 7)
Husqvarna Viking Edge Joining Foot (Cat 7)
Now £9.37

Husqvarna Viking Edge Joining Foot (Cat 7)

 

 

Guides topstitching. Guides trims that are sewn to an edge or when two trims are sewn together. Edge/stitch: Straight stitch, left needle position, length 2–4.

 

Other information

1. Snap on the Edge/Joining Foot.
2. Place edge of fabric against flange/guide. Sew. Topstitch: Straight stitch, center needle position, length 2–4.

1. Snap on Edge/Joining Foot.
2. Place flange/guide at line to topstitch. Sew.
Joining: 3 step zigzag, or bridging stitch, length 2–3, width 4–7.

1. Place two pieces of fabric or trim, one on each side of the guide/flange of the foot.
2. Sew. Keep fabric/trim against the flange/guide to join them.

Husqvarna Viking Edge Joining Foot (Cat 7)

Husqvarna Viking Edge Joining Foot (Cat 7)

Husqvarna Viking Edge Joining Foot (Cat 7)  Guides topstitching. Guides trims that are sewn to an edge or when two trims are sewn together...
£12.49
£9.37
Save £12.51 Was £25.00
 
Add Husqvarna Viking Edge Joining Foot (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Edge Joining Foot (100Q)
Husqvarna Viking Edge Joining Foot (100Q)
Husqvarna Viking Edge Joining Foot (100Q)
Now £9.37

Husqvarna Viking Edge Joining Foot (100Q).

 

 

Guides topstitching. Guides trims that are sewn to an edge or when two trims are sewn together. Edge/stitch: Straight stitch, left needle position, length 2–4.

 

Other information

1. Snap on the Edge/Joining Foot.
2. Place edge of fabric against flange/guide. Sew. Topstitch: Straight stitch, center needle position, length 2–4.

1. Snap on Edge/Joining Foot.
2. Place flange/guide at line to topstitch. Sew.
Joining: 3 step zigzag, or bridging stitch, length 2–3, width 4–7.

1. Place two pieces of fabric or trim, one on each side of the guide/flange of the foot.
2. Sew. Keep fabric/trim against the flange/guide to join them.

 

For Husqvarna Viking H Class 100Q Machine Only.

Husqvarna Viking Edge Joining Foot (100Q)

Husqvarna Viking Edge Joining Foot (100Q)

Husqvarna Viking Edge Joining Foot (100Q).   Guides topstitching. Guides trims that are sewn to an edge or when two trims are sewn together...
£12.49
£9.37
Save £12.51 Was £25.00
 
Add Husqvarna Viking Edge Joining Foot (100Q) to Shopping Basket Add To Basket
Husqvarna Viking Overlocker Lace Foot
Husqvarna Viking Overlocker Lace Foot
Husqvarna Viking Overlocker Lace Foot
Now £9.19

Husqvarna Viking Overlocker Lace Foot

 

This foot is used for sewing lace or borders together or onto the workpiece.

Other information

Preparing the machine
• Needle: Right needle
• Stitch type: Three-thread overlock or three—thread standard rolled hem
• Stitch length: 1.5 - 3 mm
• Differential feed lever: Normal position
• Upper knife: Working or non-working position
Sewing
1. Place the fabric under guide finger (A) and lace on top of guide finger (A).
2. If necessary, loosen screw (C) and slide guide plate (B) to the left or right to adjust stitch width.
3. Tighten screw (C).
4. Guide lace along guide plate (B) and sew.
Note: If there is no necessity to cut the fabric edge, place both fabric and lace on top of guide finger (A) . Be sure to disengage the upper knife.
 
For Husqvarna Viking Overlocker: Huskylock S15.
Husqvarna Viking Overlocker Lace Foot

Husqvarna Viking Overlocker Lace Foot

Husqvarna Viking Overlocker Lace Foot This foot is used for sewing lace or borders together or onto the workpiece.Other informationPreparing the..
£12.25
£9.19
Save £12.25 Was £24.50
 
Add Husqvarna Viking Overlocker Lace Foot to Shopping Basket Add To Basket
Husqvarna Viking Overlocker Beading Foot
Husqvarna Viking Overlocker Beading Foot
Husqvarna Viking Overlocker Beading Foot
Now £7.49
Husqvarna Viking Overlocker Beading Foot.
 
 
This foot is used for sewing on beads, spangles, etc.
 

Other information

Preparing the machine
• Needle: Left or right (left is preferable.)
• Stitch type: Three-thread overlock or wrapped edge overlock
• Stitch length: 3-5mm
• Differential feed lever: Normal position
• Upper knife: Working or non-working position
Sewing
1. Select sewing method (A) or (B), then determine needle position and sew 2 or 3 stitches.
2. Turn hand wheel with hand until needle point is level with fabric surface on its upward
stroke. Then insert the end of string of beads into guide on presser foot.
3. Sew 2 - 3 stitches by turning hand wheel with hand.
4. Press beards lightly with left finger while sewing.
5. Sew the last few stitches by turning hand wheel with hand to avoid beads interfering with
needle and loopers.
 
For Husqvarna Viking Overlocker: Huskylock S15.
 
Husqvarna Viking Overlocker Beading Foot

Husqvarna Viking Overlocker Beading Foot

Husqvarna Viking Overlocker Beading Foot.   This foot is used for sewing on beads, spangles, etc. Other informationPreparing the machine..
£9.99
£7.49
Save £10.00 Was £19.99
 
Add Husqvarna Viking Overlocker Beading Foot to Shopping Basket Add To Basket
Husqvarna Viking Spool Stand 416374701
Husqvarna Viking Spool Stand 416374701
Husqvarna Viking Spool Stand 416374701
Now £9.99
Husqvarna Viking Overlocker Beading Foot.
 
 
This foot is used for sewing on beads, spangles, etc.
 

Other information

Preparing the machine
• Needle: Left or right (left is preferable.)
• Stitch type: Three-thread overlock or wrapped edge overlock
• Stitch length: 3-5mm
• Differential feed lever: Normal position
• Upper knife: Working or non-working position
Sewing
1. Select sewing method (A) or (B), then determine needle position and sew 2 or 3 stitches.
2. Turn hand wheel with hand until needle point is level with fabric surface on its upward
stroke. Then insert the end of string of beads into guide on presser foot.
3. Sew 2 - 3 stitches by turning hand wheel with hand.
4. Press beards lightly with left finger while sewing.
5. Sew the last few stitches by turning hand wheel with hand to avoid beads interfering with
needle and loopers.
 
For Husqvarna Viking Overlocker: Huskylock S15.
 
Husqvarna Viking Spool Stand 416374701

Husqvarna Viking Spool Stand 416374701

Husqvarna Viking Spool Stand 416374701.The Spool Stand is an accessory to make it easier to use large spools of decorative thread. The stand is mounted..
£9.99
£9.99
Save £10.00 Was £19.99
 
Add Husqvarna Viking Spool Stand 416374701 to Shopping Basket Add To Basket
Husqvarna Viking Foot Control Cable (Cat 7)
Husqvarna Viking Foot Control Cable (Cat 7)
Husqvarna Viking Foot Control Cable (Cat 7)
Now £9.99
Husqvarna Viking Overlocker Beading Foot.
 
 
This foot is used for sewing on beads, spangles, etc.
 

Other information

Preparing the machine
• Needle: Left or right (left is preferable.)
• Stitch type: Three-thread overlock or wrapped edge overlock
• Stitch length: 3-5mm
• Differential feed lever: Normal position
• Upper knife: Working or non-working position
Sewing
1. Select sewing method (A) or (B), then determine needle position and sew 2 or 3 stitches.
2. Turn hand wheel with hand until needle point is level with fabric surface on its upward
stroke. Then insert the end of string of beads into guide on presser foot.
3. Sew 2 - 3 stitches by turning hand wheel with hand.
4. Press beards lightly with left finger while sewing.
5. Sew the last few stitches by turning hand wheel with hand to avoid beads interfering with
needle and loopers.
 
For Husqvarna Viking Overlocker: Huskylock S15.
 
Husqvarna Viking Foot Control Cable (Cat 7)

Husqvarna Viking Foot Control Cable (Cat 7)

Husqvarna Viking Foot Control Cable (Cat 7). Will fit Husqvarna Viking Category 7 sewing machines. This lead attaches the Foot Control to the..
£9.99
£9.99
Save £9.01 Was £19.00
 
Add Husqvarna Viking Foot Control Cable (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 5)
Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 5)
Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 5)
Now £6.86

Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 5)

 

 

Sew quick tucks easily on medium weight fabrics. Use with Twin Needle. Straight stitch, length 2.5mm

 

Other information

1. Snap on foot. Insert and thread 2.0 or 2.5 twin needle.

2. Pintucks are formed by Twin Needle sewing as fabric tunnels into the groove on underside of foot.

3. Place tuck in outside groove of foot to guide next tuck.

Note: Snap on Raised Seam Plate for heavier fabrics or to place cord in tucks. For corded tucks, place cord or yarn in guide on raised seam plate.

 

not for DESIGNER DIAMOND deLuxe™, DESIGNER DIAMOND™, DESIGNER RUBY deLuxe™, DESIGNER RUBY™, DESIGNER TOPAZ™ 30/20, SAPPHIRE™; OPAL™ and EMERALD™ series.

Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 5)

Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 5)

Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 5)  Sew quick tucks easily on medium weight fabrics. Use with Twin Needle..
£9.15
£6.86
Save £9.21 Was £18.36
 
Add Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 5) to Shopping Basket Add To Basket
Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 6)
Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 6)
Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 6)
Now £6.86

Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 6)

 

 

Sew quick tucks easily on medium weight fabrics. Use with Twin Needle. Straight stitch, length 2.5mm

 

Other information

1. Snap on foot. Insert and thread 2.0 or 2.5 twin needle.

2. Pintucks are formed by Twin Needle sewing as fabric tunnels into the groove on underside of foot.

3. Place tuck in outside groove of foot to guide next tuck.

Note: Snap on Raised Seam Plate for heavier fabrics or to place cord in tucks. For corded tucks, place cord or yarn in guide on raised seam plate.

 

not for DESIGNER DIAMOND deLuxe™, DESIGNER DIAMOND™, DESIGNER RUBY deLuxe™, DESIGNER RUBY™, DESIGNER TOPAZ™ 30/20, SAPPHIRE™; OPAL™ and EMERALD™ series.

Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 6)

Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 6)

Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 6)  Sew quick tucks easily on medium weight fabrics. Use with Twin Needle..
£9.15
£6.86
Save £9.21 Was £18.36
 
Add Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 7)
Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 7)
Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 7)
Now £6.86

Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 7)

 

 

Sew quick tucks easily on medium weight fabrics. Use with Twin Needle. Straight stitch, length 2.5mm

 

Other information

1. Snap on foot. Insert and thread 2.0 or 2.5 twin needle.

2. Pintucks are formed by Twin Needle sewing as fabric tunnels into the groove on underside of foot.

3. Place tuck in outside groove of foot to guide next tuck.

Note: Snap on Raised Seam Plate for heavier fabrics or to place cord in tucks. For corded tucks, place cord or yarn in guide on raised seam plate.

 

not for DESIGNER DIAMOND deLuxe™, DESIGNER DIAMOND™, DESIGNER RUBY deLuxe™, DESIGNER RUBY™, DESIGNER TOPAZ™ 30/20, SAPPHIRE™; OPAL™ and EMERALD™ series.

Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 7)

Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 7)

Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 7)  Sew quick tucks easily on medium weight fabrics. Use with Twin Needle..
£9.15
£6.86
Save £9.21 Was £18.36
 
Add Husqvarna Viking 3 Groove Pin Tuck Foot with Raised Seam Foot (Cat 7) to Shopping Basket Add To Basket
Husqvarna Viking Candlewicking Foot (Cat 6)
Husqvarna Viking Candlewicking Foot (Cat 6)
Husqvarna Viking Candlewicking Foot (Cat 6)
Now £6.75

Husqvarna Viking Candlewicking Foot (Cat 6)

 

The Candlewicking Foot has a deep tunnel on the underside to feed over a builT up stitching. Program a "French Knot" stitch on computer Husqvarna Viking sewing machines to sew the heirloom candlewicking technique.

 

Other information

1. Program:
For most computer models:
Prog: (zigzag stitch, width 2.0, length 0.0), enter this program seven times, (straight stitch, width 0, length 1.5-2.5) enter two times (experiment with length settings, the French Knots are spaced further apart with a longer stitch length).

For Husqvarna Viking Rose model 600:
Prog: (stitch number 38, width 2.0, length 0.1), enter one time, (stitch number 1, width 0, length 1.5-2.5) enter two times.
Touch REP.
Sew.

not for IRIS™, SCANDINAVIA™ and EMERALD™ series.
Husqvarna Viking Candlewicking Foot (Cat 6)

Husqvarna Viking Candlewicking Foot (Cat 6)

Husqvarna Viking Candlewicking Foot (Cat 6) The Candlewicking Foot has a deep tunnel on the underside to feed over a builT up stitching. Program..
£9.00
£6.75
Save £9.36 Was £18.36
 
Add Husqvarna Viking Candlewicking Foot (Cat 6) to Shopping Basket Add To Basket
Husqvarna Viking Candlewicking Foot (Cat 7)
Husqvarna Viking Candlewicking Foot (Cat 7)
Husqvarna Viking Candlewicking Foot (Cat 7)
Now £6.75

Husqvarna Viking Candlewicking Foot (Cat 7)

 

The Candlewicking Foot has a deep tunnel on the underside to feed over a builT up stitching. Program a "French Knot" stitch on computer Husqvarna Viking sewing machines to sew the heirloom candlewicking technique.

 

Other information

1. Program:
For most computer models:
Prog: (zigzag stitch, width 2.0, length 0.0), enter this program seven times, (straight stitch, width 0, length 1.5-2.5) enter two times (experiment with length settings, the French Knots are spaced further apart with a longer stitch length).

For Husqvarna Viking Rose model 600:
Prog: (stitch number 38, width 2.0, length 0.1), enter one time, (stitch number 1, width 0, length 1.5-2.5) enter two times.
Touch REP.
Sew.

not for IRIS™, SCANDINAVIA™ and EMERALD™ series.
Husqvarna Viking Candlewicking Foot (Cat 7)

Husqvarna Viking Candlewicking Foot (Cat 7)

Husqvarna Viking Candlewicking Foot (Cat 7) The Candlewicking Foot has a deep tunnel on the underside to feed over a builT up stitching. Program..
£9.00
£6.75
Save £9.36 Was £18.36
 
Add Husqvarna Viking Candlewicking Foot (Cat 7) to Shopping Basket Add To Basket
Pages:1 2 3 View All
Website Programming, CMS and SEO by Web Alliance Ltd.