Dylon 2205091 | Machine Dye Pod | 10 Sandy Beige
Ready-to-use fabric dye - easier than ever! Dylon fabric dyes are easy to use and completely safe for your washing machine - Just place in the drum. The all-in1 formula revives or transforms the colour of your clothes and soft furnishings, providing long lasting and intense colour.
This dye is suitable for: cotton, linen & viscose. Mixes with synthetics will dye to lighter shades (pure synthetics will not dye).
One pack dyes 600g of fabric to full shade, up to 1.8kg to lighter shades.
Preparation For best results - read the full instructions and helpful hints on the packaging before starting. The shade you will achieve depends on 3 things:
1) Fabric Type:
Cotton, linen & viscose will dye to full shade Mixed fabrics (containing synthetics such as polyester) will dye to lighter shades Wool, silk, fully synthetic fibres (polyester, acrylic, nylon) & fabrics with special finishes or membranes (e.g. 'dry clean only' or 'fire retardant' etc.) cannot be dyed.
2) Fabric Amount:
1 pack will dye up to 600g of dry fabric to the full shade (e.g. jeans, 4 t-shirts or a bath towel). Larger amounts of fabric will result in lighter shades (1 pack can dye up to a maximum of 1.8kg of fabric) For full shade on larger amounts of fabric use multiple packs (i.e. 2 packs for 1.2kg fabric; e.g. double duvet cover).
3) Original Fabric:
Colour Colour mixing rules apply when doing this:
Dyeing to a lighter colour, or changing from one strong colour to another, is only possible by using Dylon Pre-Dye first
Patterns on fabric may still show through after dyeing
Please note that stitching may not dye (if synthetic)
Dyeing may not cover stains, faded areas or bleach marks
1.Place damp unfolded fabric into the washing machine drum. Always start with clean fabric (wash thoroughly, even if new, to remove stains or any finishes that cannot be seen).
2. Remove sleeve completely. Peel off lid from the top of dye pod and place the full pod into the drum in an upright position (on top of fabric).
3. Run full cotton cycle (avoid pre-wash, economy or half load cycles). For best results dye at 40°C (the dye works at 30°C - if required by the fabric).
4. When cycle is complete, remove the empty pod from the machine. Add washing detergent & run another cycle (same washing settings as the first).
5. Remove fabric, add detergent & run empty cycle to remove any remaining traces of dye (at 40°C or 60°C)