Quick and easy button sewing with the special button sewing foot. This foot has two bars that attach to the foot chank to provide extra stability and also has a textured rubber sleeve to hold the button securley in place whilst sewing.
(AN IDEAL SOLUTION!)
How to use the Button Sewing foot.
- Unthread the needle thread.
- Adjust the stitch width so that the needle enters both holes in the button.
- Place the button on the fabric and lower the needle by turning the handwheel so that the needle enters into the left hole in the button.
- Align the holes in the button with the foot and lower it to hold the button in place.
- Turn the handwheel to lower the needle into the right hole in the button.
- Adjust the stitch width if necessary.
- Rethread the machine and affix the button with 10 stitches.
- For multi-hole button move the needle drop to the next set of holes and repeat as necessary.
- Unthread the needle thread.
- Adjust the stitch width so that the needle enters both holes in the button.
- Place the button on the fabric and lower the needle by turning the handwheel so that the needle enters into the left hole in the button.
- Align the holes in the button with the foot and lower it to hold the button in place.
- Turn the handwheel to lower the needle into the right hole in the button.
- Adjust the stitch width if necessary.
- Rethread the machine and affix the button with 10 stitches.
- For multi-hole button move the needle drop to the next set of holes and repeat as necessary.
For Janome Top Loaders Category C :- ATELIER 3, MC11000, MC10001, MC10000, MC9700, MC9500, MC9000, MC7700QCP, MC6600P, Jem , 639
