Search Spares and Accessories
Pfaff / Pfaff Clear 1/4 Inch Quilting Foot with IDT (Cat J)
Pfaff Clear 1/4 Inch Quilting Foot with IDT (Cat J)
Pfaff Clear 1/4 Inch Quilting Foot with IDT (Cat J) Clearance

Pfaff Clear 1/4 Inch Quilting Foot with IDT (Cat J)

Now £12.49
Save £12.50 Was £24.99
QUANTITY

Product Code : 820883096
Product Details

Pfaff Clear 1/4 Inch Quilting Foot with IDT (Cat J).

 

The Clear 1/4 inch Quilting Foot is great for joining pieces of fabric as it gives clear visibility when sewing 1/4, 1/8 and 3/8 inch seams. The red lines on the presser foot mark 1/4 inch pivot points in front of and behind the needle.


1. Place two pieces of fabric right sides together.
2. Select straight stitch, stitch length 2.5.
3. Engage IDT™ system.
4. Place the fabric under the presser foot.
5. When using 1/8 inch seam allowance, guide the fabric along the inner edge of the toe. When using 1/4 inch seam allowance, guide the fabric along the outer edge of the toe. When using 3/8 inch seam allowance, guide the fabric along the outer edge of the foot.
6. To pivot 1/4 inch from the end of the fabric, stop sewing when the fabric edge reaches the first
red mark on the foot.

 

The foot will fit Category J Machines.

Pfaff Clear 1/4 Inch Quilting Foot with IDT (Cat J)


  SOLD OUT



Now 12.49

Pfaff Clear 1/4 Inch Quilting Foot with IDT (Cat J) Clearance

Pfaff Clear 1/4 Inch Quilting Foot with IDT (Cat J).

 

The Clear 1/4 inch Quilting Foot is great for joining pieces of fabric as it gives clear visibility when sewing 1/4, 1/8 and 3/8 inch seams. The red lines on the presser foot mark 1/4 inch pivot points in front of and behind the needle.


1. Place two pieces of fabric right sides together.
2. Select straight stitch, stitch length 2.5.
3. Engage IDT™ system.
4. Place the fabric under the presser foot.
5. When using 1/8 inch seam allowance, guide the fabric along the inner edge of the toe. When using 1/4 inch seam allowance, guide the fabric along the outer edge of the toe. When using 3/8 inch seam allowance, guide the fabric along the outer edge of the foot.
6. To pivot 1/4 inch from the end of the fabric, stop sewing when the fabric edge reaches the first
red mark on the foot.

 

The foot will fit Category J Machines.

4.0 out of 5 with 1 ratings
Website Programming, CMS and SEO by Web Alliance Ltd.