Search Spares and Accessories
Pfaff / Pfaff Decorative Trim Foot with IDT (Cat C)
Pfaff Decorative Trim Foot with IDT (Cat C)
Pfaff Decorative Trim Foot with IDT (Cat C) Clearance

Pfaff Decorative Trim Foot with IDT (Cat C)

Now £12.49
Save £12.50 Was £24.99
QUANTITY

Product Code : 820614096
Product Details

Pfaff Decorative Trim Foot with IDT (Cat C).

 

Embellish your project with different types of trims by using the Decorative trim Foot. This foot will easily guide the trims through the opening at the front and through the groove under the presser foot.


1. Thread your machine with a regular sewing thread or decorative thread on top and regular sewing thread in the bobbin.
2. Select a straight stitch, zigzag stitch or decorative stitch. Avoid using stitches with side motion and stitches with too much motion forward and back.


Tip: For the 6 mm wide trims, you can also use a 6 mm twin needle. Select a straight stitch and it will sew at the edges of the trim.


3. Place the trim in the presser foot as the picture shows.
4. Snap on the Decorative Trim Foot.
5. Engage IDT™ system.
6. Sew carefully, not too fast. If your machine has the sew slow function, engage it. (You might need stabilizer underneath the fabric)
7. The best result is achieved if you use flat trims,

 

This foot will fit Category C machines.

 

Pfaff Decorative Trim Foot with IDT (Cat C)





Now 12.49

Pfaff Decorative Trim Foot with IDT (Cat C) Clearance

Pfaff Decorative Trim Foot with IDT (Cat C).

 

Embellish your project with different types of trims by using the Decorative trim Foot. This foot will easily guide the trims through the opening at the front and through the groove under the presser foot.


1. Thread your machine with a regular sewing thread or decorative thread on top and regular sewing thread in the bobbin.
2. Select a straight stitch, zigzag stitch or decorative stitch. Avoid using stitches with side motion and stitches with too much motion forward and back.


Tip: For the 6 mm wide trims, you can also use a 6 mm twin needle. Select a straight stitch and it will sew at the edges of the trim.


3. Place the trim in the presser foot as the picture shows.
4. Snap on the Decorative Trim Foot.
5. Engage IDT™ system.
6. Sew carefully, not too fast. If your machine has the sew slow function, engage it. (You might need stabilizer underneath the fabric)
7. The best result is achieved if you use flat trims,

 

This foot will fit Category C machines.

Website Programming, CMS and SEO by Web Alliance Ltd.