Brother Multi Function Foot Control MFFC1 | & Brother V Series Upgrade Kit 2 UGKV2

Brother Multi Function Foot Control MFFC1.
 

Program the foot controller functions through the LCD display on your machine.

Two-pedal controller can be set to control thread cutting, single stitch sewing, reverse stitch sewing, and moving the needle up and down.

The small pedal can be set to control one function, and the larger pedal can be set to control two functions.

Compatible with:
Brother Innov-is XJ1, XP1, XV, and V-Series.

______________________________________________________________________________

Brother V Series Upgrade Kit 2
 

The V-Series Software Upgrade Premium Pack II is the latest upgrade for your V-Series machines.
 

Now with added designs, presser foot and multi-function foot controller capabilities, you have more options and designs for your projects.
 

With this upgrade you can set the machine to automatically raise the foot as soon as you stop sewing and then when you have repositioned your fabric just start sewing again and the foot will automatically lower and start sewing.

You can also set the machine to allow you use the thread cutters with the foot up!

Plus, the Software Upgrade Premium Pack II is easy to install – with an internet connection, simply use the activation code.
 

The UGKV2 includes :-

• Additional 183 sewing/decorative stitches
  (3 x Cross Stitches, 5 x Utility stitches, 121 Fixed decorative stitches, 54 x Adustable decorative stitches)
• Upgraded presser foot functionality
• Cut threads after foot has been raised
• Use with multi-function foot controller
   

Please Note:

*Multi-function foot controller (MFFC1) Is required
*An internet connection is required to run the software upgrade.

Suitable to fit Brother Sewing Machine Models:
Brother Innovis V7 and V5.