Brother Pearls & Sequins Overlock Foot (Airflow 3000).
For a truly unique finish, why not try the Brother Pearls Presser Foot?
Easily embellish clothing with fancy trims, pearls and beadwork.
1. Retract the knife on your machine.
2. Set the machine setting: 3 thread overlock, stitch length to pearl size, stitch width to 3 mm from 5 mm, and adjust the tension.
3. Fold the fabric.
4. Align the edge of the fabric to the guide on the front of the foot.
5. Adjust the guide so that the needle moves down at the position of 1 to 1.5 mm from the folded edge.
6. Place the strings of pearls/beads onto the tunnel and then sew.
Compatible with:
Brother Airflow 3000.
